Having problems with your Air Conditioners ?

Goodman split not responding to remote

\015 Have a Goodman split in my place. Turned on for some heat this morning, and then went to turn it off about 40 minutes later, no beep, no turning off. Got back this afternoon, tried new batteries in remote, no response from unit.Tried holding remote directly up to IR eye, no response.Have no manual, appears to be no way to turn off on the unit, Goodman apparently does not have downloadable manuals.Other symptom, remote changes back to Celcius frequently, apparently on its own.\015

Answers :

First turn the main power off to the unit at the breaker, wait about five min. and switch the breaker back on, then see if this solves the problem. In the instalation manual that came with the unit on the last page you will see a code of the red blinking light, this will tell you the most likely problem if not solved by switching the breaker on again.............Hope this helps

Buy a new remote. hvacguyy.tripod.com to change to f or c hold in complete up and down menu button

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Goodman split not responding to remote


First turn the main power off to the unit at the breaker, wait about five min. and switch the breaker back on, then see if this solves the problem. In the instalation manual that came with the unit on the last page you will see a code of the red b ... Hitachi RAS-09UH Air Conditioner

I have a split system a/c that the head unit will not respond to the remote. If I turn off the power and restart and I manualy push the button it comes on and blows cool air and then shuts off but I can't get the remote to do anything. Batteries are good and the remote works on my the other unit. I think I need to replace something in the head unit cause it acts like it doesn't acknoweldge the signal from the remote.


Replace receiver board or if you have a spare unit try to transfer the receiver board to the defective one and test the remote to confirm the unit problem. ... Samsung Air Conditioners

I need a remote sensor PCB for an LG Split System Airconditioner, 3828A20242R. I think anyway. Remote does not work (display good, AC does not respond). Bought another remote, it does not work either. Where can I buy a replacement reciever?


... LG Air Conditioners

Even though the remote has lights on the split system air con. does not respond to the remote. We can operate the system manually but the remote is 'lights are on no ones home'!!


The remote may havce bad battery connections? bad battries? be locked off? remove and replace battries. locate program switch on wall stat. temp set to energy saving mode. set out of temp set up-back mode to run in on-off-on mode non occupied ... Air Conditioners

Remote problem,remote looks like it's working,but a/c does not respond to commands.is it remote or a/c unit.have to turn on and off with small screw driver.what can i do.i have awmc-18-1kfah,wall mounted split a/c,serial#970100237208-2301160.


It is the a/c that is malfunctioning and not the remote. Unless the battery of the remote has run down. ... Air Conditioners

I Have a celestial split system air conditioner kk7b-c4, i have changed both of the remote control batteries. The bedroom system is turning on with both remotes however the lounge system does not respond to either remotes and i cannot see a manual button anywhere on the system. Thank you


... Air Conditioners

I have an split-type aircon (brand: General) remote control AR-DL2. it has power and display when i put on batteries. but the aircon unit does not respond to the remote control. what do i do to fix this? Is there something to do to reset the remote control and re-program ? Or shall i buy a new one


I have general electronic ac brand i cant found universal remote can u find one for me what are the universal remote that compatible for my ac tq ... Air Conditioners

Split units I have a 1800 Frigidaire Split Air conditioner Model FSE18C18DWV #10130Q831 and it is not responding to the remote. The on/off indicator is flashing and a 'CLOCK' indicator is lit


... Air Conditioners

I have a Goodman mini-split system with a remote control. When I set the remote for a certain temperature in the summer to 80 degrees, the unit reaches that but then keeps dropping the temperature another 8 degrees. It will not hold the set temperature. Any answers? Thank you


How far from the unit or room do you have the remote? remember the remote is the sensor, if it isnt near the unit it will not shut off! place the remote 8 feet from the unit and leave it there, if it doesnt shut off, it was installed wrong or is malf ... Goodman CKL24AR24 Air Conditioner

I have an LG Art Cool Split system, I think model C24AWR N82. Using the remote and it doesn't seem to be communicating to the unit? The remote is working so the batteries are fine, but the unit isn't responding?


The remote is fine, the batteries are new, the remote is giving signal.The remote is not communicating with the AC.On the split system front panel.There is a sensor in the internal side of the panel.This sensor detects the signal from remote.But if t ... Air Conditioners

My Airwell split wall mounted A/C unit will not respond to the remote. The remote works fine on the other units. How can I solve this problem. peter


... Air Conditioners

Indoor Sanyo ductless split Model # KHS 2432 serial # 0012832, Works fan on and off functions and speeds. As soon as you set the remote to heating or cooling the unit beeps 5 times quickly and then the unit no longer responds to remote control. The blower will then run for 1 minute and then the the unit no longer will work. Power must be reset for blower operations to function again. Out door unit, has enough charge, Ambient temp 39 M#CH2432 S#0012424


... Sanyo Air Conditioners

I have a Goodman mini-split system with remote. When in heat mode I set the remote to 62 degrees and it consistently overshoots to 72 degrees. The model # is MSG18HWN1N


... Goodman Air Conditioners

Split system airconditioner Panasonic model CU-A28CKR.not responding to remote


Some of the samsung units need to be reset if you have a new remote..contact your nearest agent for that aircon they will give you a code to type in using the remote control.if this does not work you might have to replace the internal pc board.good l ... Air Conditioners

My mini split only sometimes responds to the remote


Indoor pcb in the indoor unit faulty and the responder. ... Soleus KFR-18GW Split System Air Conditioner

Have model ASTB24LDC/AOTS24LDC Inverter Fujitsu split system. As of Thursday 11th Nov, unit stopped working. Won't respond with remote. An electrician came to test it this morning, says there is power to the unit. He cannot fix it due to warranty on the system. With this model is there a manual button that I can try to start it up? Garry


I have same problem like yours to my newlyinstalled Fujitsu multi-split system (the first time use since system installed1 week ago). I rang the electrician whodid the installation; he said it must be the units themselves nothing to dowith elec ... Fujitsu 24C1 Air Conditioner

Have a Multi Split Indoor unit ASU9RD - 2 units and Outdoor unit AOU18RD. Operation blinking GREEN; Timer blinking RED. Remotes not responding, Turn off units at circuit breaker, units still blinking the same. Both indoor units went down at same time. Had unit serviced in June 2010. What are the blinking lights telling us (Code)?


Hi.Here error codes:ERROR CONTENTS ... Fujitsu 12C1 Air Conditioner

Carrier 18000btu split system, internal red light flashing at 1 second intervals, no response from remote control, have replaced internal sensor but still not responding


... Air Conditioners

Split system air con LG model LST 2434C-2 unit won't turn on, remote is working but unit won't respond, turned on at wall.


Check there will be red icon when power is on,before switch on by emote. If no red light, there is no power goes into indoor unit. Check. If red light is there and no response with remote, communication error between remote and PCB in indoor. Try wit ... LG Air Conditioners

Air conditioner LG SPLIT AIR CONDITIONER LSA18U1RPL1 AA32DRA IS NOT RESPONDING FOR REMOTE AND THERE IS NO DISPLAY IN THE AIR CONDITIONER ALSO.IF WE PRESS MANUALLY IN THE AIR CONDITIONER ALSO THERE IS NO RESPONSE.PL TELL THE REMEDY. THANKS


... LG Air Conditioners

One of my Sanyo Split AC Units (KS0911) has stopped responding to the remotes, both of which work fine and control the other unit in my system. I saw that the advice to someone else was to repair the 'receiving sensor in the PCB assembly' Can that be done or do I have to replace the entire PCB assembly? (And what does PCB stand for, please?)


... Sanyo Split System Air Conditioner

My hisense split ac unit is not responding to its remote control. please help


Hello Bernard the problem u may experience may be dirty contacts on the main board.dissamble the remote and wipe it dry with some 226 electrical cleaner ,re-assemble and test.if problem still exist then you may need a new remote.or it may simply need ... Air Conditioners

Nec split system air con will not respond to remote control.


Remove batteries and replace with new batteries and restart. If still problem, unplug DC wire to indoor display sensor and plug it after a minute. Now try with your remote. If still problem, try with another remote. If no result, PCB receiving sensor ... Air Conditioners

I entered questions for the split Goodman HVAC system yesterday. Two people responded. In response to taa43-Tom, I will get more local opinions & quotes tomorrow. Do you live in the Southeast? That's the first I've heard about plastic increasing condensation mold. Where would that be? under plastic on ground, or between plastic and bottom of house around duct work? to barger4, We actually have two systems. The 2 ton HVAC is for a smaller area, and I think it does not have a heat pu


Better off taking good money and put into something with a warranty. its probably a 4 hour job to recover solder in new valve change drier pull vacuum recharge If your system is freezing up it may not be the valve could be a check valve. low freon d ... Goodman CLQ36AR49 Air Conditioner

My airconditioner, a Kelvinator inverter split system keeps showing P4 and won't respond to a remote to turn it on or off!


... Air Conditioners

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || www.ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.0518 seconds