Having problems with your Air Conditioners ?

Broken Knob for fan control

\015 The knob broke and we had been using a pair of pliers to turn the knob post, but now that broke. We need to take the front plastic molding off to see if we can repair the broken knob/post ourselves. Any suggestions?\015

Answers :

Once you take off the front housing, the switch itself shoud be easy to remove and replace...sometimes, a used appliance store/repair office can get a suitable replacement part. Trick is to mark the wires as you remove them from the switch and take hte switch with you while you go part hunting. Also would help to have model and serial number (and brand name) noted to take along.\015\012\015\012Papdaddy

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Broken Knob for fan control

Once you take off the front housing, the switch itself shoud be easy to remove and replace...sometimes, a used appliance store/repair office can get a suitable replacement part. Trick is to mark the wires as you remove them from the switch and take ... Comfort-Aire CS-101A Air Conditioner

Plastic knobs (off/on and fan speed) are broken. Need replacement

This is for any pin that is in the shape of a half moon (if you remove the broken knob and are looking at it from the top view, it looks like a half moon).Get a piece of wood. (I made mine 1" x1"x1". Some craft supply stores sell wooden ball ... Carrier LCA061P Air Conditioner

I need a new plastic control knob for my Airtemps air conditioner. Below it says "MASTER CONTROL" and it controls the fan and air conditioning levels. Model number B1V10S2C Serial number KL389479 2929 Can I get this part ASAP?? Thanks, Alice Barden

You can get the parts from this link....\015\012\015\012http://www.appliancefactoryparts.com/airconditioners/airtemp/b1v1 ... Airtemp Air Conditioners

I bought a ceiling fan yesterday and one of the globes is broken. I really like the fan and the installer put it up. The name of the fanis Garrison 52" remore control..Model No. 640-656

... Hampton Bay Air Conditioners

The fan knob on the climate control panel only operates on the high range and will not even turn the a/c on in low or medium. when in high range the a/c unit overall seems to be performing like normal except sometimes the air flow from the vents decreases and increases from the vent that is below the im assuming blower in the floor board on the passenger side. ive checked all the fuses under the hood and on the inside, and even replaced the optional climate control panel yesterday.

Had the identical problem in my Grand Cherokee... you need a new relay switch... mine was located under the dash on the passenger side and was ceramic -- when they go bad they only allow the climate control system to work on high speed. ... Air Conditioners

The control knob (On-Off Switch, with heating levels 1-5) has broken off and "super gluing" has been unsuccessful. Is there somewhere to purchase a new knob? The unit is a small(3 foot) baseboard heater make by Intertherm. (Hot-water electric heat).

... Intertherm Air Conditioners

Sears kenmore model 253-357371, vertical 10,000 btu how do i get the front cover off? purchased used and want to clean the spong. Removed the control knobs but does not want to come off?? Don't see any screws just were some little plastic clips that i have already broken. Can't find the manual online either so no help there.

... Kenmore Air Conditioners

My product is a Holmes oil-filled heater. The model # is HOH2505. There are two round control knobs and both are broken. Can I get a replacement? Frankie Moore

Hi and welcome to FixYa. I am Kelly. I don't have the answer to your knob problem other than to contact a Holmes Service Center. However, this particular heater was the subject of a recall (see link below.) Maybe you can get lucky and get a whole ... Air Conditioners

Knob on my Bonaire Evap cooler control panel is broken

... Air Conditioners

I just bought a house and don't know how to use the honeywell AC,it's a central AC,has a manual control,when I turned on , I don't feel any cold air,I notice the fan inside the house is working, but the device outside the house is not. The thing is I don't Know if I'm seeting up correctly or not or the AC is broken

Do you have the system on A/C and it's calling for it to come on? If so, go to your breaker box and see if the unit is getting power. Also, you will need to check if the unit is being told to come on by the tstat. If you don't know how to check v ... Air Conditioners

Where can i buy a master control switch for a fedders wall unit air conditioner, the knob stem is broken.

... Fedders AEQ07FBG Air Conditioner

My window air conditioner unit, has the control knob stem has broken completly off, it is a hamton bay

Www.repairclinic.com\015\012as ur part is broken u may require a new 1 to replace it ,also u will need the step by step instructions to fit the new 1.the above link will ... Air Conditioners

Just purchased and installed new unit fan works on all settings but no cool compressor does not work, it has the control knobs on the unit, Thanks

Could be a capacitor blown or over load burn't on the compressor. ... Dometic 57915531 Air Conditioner

Intertherm G4RK096C-16 Gas Furnace Fan not cutting in during heating cycle. If we wiggle the wires, fan cuts in. Some time ago during servicing, a variable speed control for the fan was installed. There is now a red wire going to the fan connector on the control panel and a blue wire with a spade tip is taped off. If we were to disconnect the variable speed control, which wire (red or blue) should be connected to the connector on the control panel?

... Intertherm Air Conditioners

Broken Fan Good Day! My problem is about my fan..though its a McQuay brand..can I change the fan even if its in different brand? I can see that the LG fan the split type AC is really the same as the McQuay. AS of now I just put a mightybond to connect the fan because it was broken. And I need the cover too for the fan? Can you help me with my problem? Hope to hear an answer very soonest. Mr K

Send fan cover size i will try2 send u ... LG LS-L1210CL Mini Split Air Conditioner

Carrier 58RAV095-16 will process thru the test sequence properly: inducer fan, ignitor, blower high, blower low, all ok. fuse checked good on controller board. when commanded to supply heat by the thermostat controller in the living space the unit runs with fan only, no gas, no ignition. changed thermostat controller, no joy. Comments: Jan 31, 2010 - thermocouple/ignitor is ok and positioned well. It tests ok too. I changed it last year. I am not getting gas flow so I suspect gas control va

Go to the furnace and turn off the power take the door off you must have a multimeter inhand with the cover off the furnace and access to the gas valve put yor meter leads on the wires going to the gas valve turn the power on and after the ignitor gl ... Air Conditioners

I have a LUX TX9000LC control, connected to a Carrier Model 394GA036100. The controls don't seem to control the furnace or air conditioning. The fan on the furnace runs continuously even when the switch on the control is in the off position. The only way I can turn the fan off on the furnace is to switch off the power to it. I put new batteries in the TX9000LC. No change. Thank you, Ron Casto

Ron, \015\012It sounds as though a "safety device" opened on your gas furnace......which shut off your furnace and has the fan running non-stop. Go to your gas furnace and look for manual reset switches......these switches typically have a smal ... Air Conditioners

Jan 12, 2010 - My air handler fan (american Standard #TWE065E13FBO) works during a/c operation but not during heating operation. Checked continunity through the the thermo sw and throught the heating coils - the coil on the heat relay is ohming good. I am thinking it might be the fan control card - but its expensive - 400+ Jan 12, 2010 - the fan in manual or auto no good in heat, there are some led light in the circurt board (fan controller) a green light (CFM) which is on when where is power

The blower won't come on with the thermostat switch set to manual either? Does the heating section come on and the fan just does not blow the heat out? This is usually a fan limit problem or relay but you say the relay is good so is there a fan limit ... Air Conditioners

My Airworks ceiling fan with remote stopped working. With Room light switch in 'on' position, remote no longer turns light on or controls fan speeds. Changed 9-volt battery but did not make a difference. In the compartment where 9-volt battery sits there is a small switch that has 4 tiny switches. Are these for any particular function of the ceiling fan? If it was only the bulb that needs replacement why should not the remote control the fan operation? Can you help or make suggestions to try?

... Air Conditioners

My compressor unit outside runs and cools Freon but the inside blower has a problem running. the model # is 2TEE3F31A1000AA. The fan control, in fan run control mode, shows a bright green for the fan LED and the CFM selection LED varies with the rotational speed of the fan. The motor tries to start showing , initially, a jerky back & forth movement. It squeaks some and may, or may not, start rotating. If it starts the CFM LED goes bright/on no flicker and the motor runs briefly (5 seconds) then

Hi, from what you have told me, you are loosing the bearings in this blower motor along with windings. This motor is rubbing the blower housing, tight when you turn it, and when it jerks when it tries to start tells me that you have burned or very we ... Air Conditioners

I have a Goodman Package unit Model # PGJ 03075-1. The blower motor only rocks back and forth while the compressor and fan run and begin to form frost on the pipes. I replaced the large capacitor, main control board, fan control board, thermostat, and removed the control module off the back of the ECM motor to look for burned areas. There are no visible burned areas. Any ideas on what to check next? Rick

The blower motor only rocks back and forth ? That means it is getting power. Most of these have their own smaller capacitor did you check it?\015\012Any sloppy vertical movement means the motor bearings are shot, the motor is what we ca ... Goodman CPLE24-1 Air Conditioner

I have one remote controller that controls two ceiling fans. The fans turn in opposite directions. There is a reverser on the remote. How can I get the fans syncronized so they turn in the same direction.

In your fan, there is a line goes to capacitor. Remove and connect with another pin of capacitor.Helpful? ... Air Conditioners

Carrier 58RAV095-16 will process thru the test sequence properly: inducer fan, ignitor, blower high, blower low, all ok. fuse checked good on controller board. when commanded to supply heat by the thermostat controller in the living space the unit runs with fan only, no gas, no ignition. changed thermostat controller, no joy.

Hello \015\012Your closing the circut,and getting power to the ignitor.\015\012\015\012Have you tried another t stat or check your wiring low voltage side.\015\012\015\012Is there a pre purge fan for gas to be cleaned ou ... Air Conditioners

I currently have an Ideal icos HE24 condensing boiler. It suddenly stopped working altogether.replaced the pcb board. Pump now working but no fan and no control panel responding. However clock working. if the fan has packed in does this mean that the control panel will not work either. Or could it be that the control panel just needs replacing. regards

... Air Conditioners

Ac works fine with fan in on position when fan is switched to auto position the fan stops and ac continues to run. the furnace will not start unless wires are disconected from control board and jumped.one extert said to replace control board and t-stat. that was done and still the same problem. this is a rv ac and furnace. thanks

What happens when you switch the wiring for the fan and the AC? ... Air Conditioners

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || www.ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.0650 seconds