Having problems with your Air Conditioners ?

Hunter thermostat i need to know how to put it on cool from heat without using the reset button

Answers :

You shouldnt have to.

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Hunter thermostat i need to know how to put it on cool from heat without using the reset button

You shouldnt have to. ... Air Conditioners

Hi, I have an Indiglo 44550 thermostat. It has been set on cool all summer and we adjust temperature manually to our needs. Now I can't get the heat to come on. I know it works, think I have pressed to many buttons. I put it on AUTO program and adjusted the heat temp. Nothing. The time zone number 1,2,3 or 4 pending on what time of day it is, won't stop flashing. Can someone please help me. Thank you.

... Hunter Air Conditioners

Model FC24B3XN1H. Modulating Echelon 60k btu. Fan runs constantly but no heat. Was installed 9/09. When turn thermostat off, fan still runs, have to shut off at furnace. It has never been a hot heat, installer said that is normal?? Used air couple days this week, was fine. We then turned furn off at thermostat as it was not needed. Turned heat on late yesterday afternoon & problem started. Left furn power off for about 15 minutes, but would not reset. Easy solve?? Is it supposed to be a 'cool' h

Hi,The fan running constant and the unit not firing is usually an indication that the high limit reset has tripped. And yes... these furnaces will run a cooler air... that is one way they get better efficiency...Also the ... Coleman Air Conditioners

Reset button for Ruud Achiever 14 heat pump/AC compressor? My Ac/heat thermostat was blowing fan on and would not turn off. I switched it off at the circuit box, and bought a new thermostat RTH221, wired it and it would not blow cool air when on cool nor warm air when on heat. Called the 800 number for Honeywell and tech said I had wired it correctly, to check outside and see if the compressor was running. It was not. This Ruud unit is only 8years old so I'm wondering if a reset button has

... Air Conditioners

There's a Frigidaire heating and cooling unit in the attic, and the thermostat is a White Rodgers (programmable). Air is blowing, but it is not HOT, though the thermostat is set at a high temperature. I have turned the switch to OFF, but the fan continues to blow. There is another compartment (as the heater lies on its side) that indicates that it's to only be open for servicing. I'm think that there is some sort of RESET button needed. Recently, new insulation was added to the attic.

Is this gas or electric heat?I can help you with all of it, but I need to know where we are working from.As for the blower running, it's either caused by the Auto-Manual switch being put in Manual, or, there is a time delay fo ... Air Conditioners

There's a Frigidaire heating and cooling unit in the attic, and the thermostat is a White Rodgers (programmable). Air is blowing, but it is not HOT, though the thermostat is set at a high temperature. I have turned the switch to OFF, but the fan continues to blow. There is another compartment (as the heater lies on its side) that indicates that it's to only be open for servicing. I'm think that there is some sort of RESET button needed. Recently, new insulation was added to the attic.

Unless you have and oil fired furnace, there is not a "reset" button. Most likely, the problem will need to be investigated and addressed by a qualified service technician due to the general complexity of HVAC equipment and a plethera of different p ... Air Conditioners

Have a problem with my Intertherm air conditioner not coming on so I put a new thermostat on it. Nothing comes on fan nor heat nor air. I reset the breaker but still nothing and the unit model is a E1eb015ha? Anyone know if there is a reset button on the unit or where I can start looking to see if there is a problem.

Turn the thermostat off and check for 24vac between R and C on the thermostat. If there is no C then to G or W. If you don't have 24vac go the transformer and check for 24vac on the secondary. If it isn't there then check for 120vac on the transforme ... Intertherm P3RA-048K Air Conditioner

Hi - our Siemens RDJ10RF remote thermostat controller fell off the shelf and went off as the batteries came loose. We put the batteries right and reset the thermostat remote, but the heating will not come on. Do we need to reset the boiler and how do we do it? The water still heats up, it is just the heating that doesnt respond to the thermostat anymore.

... Air Conditioners

I bought a programable thermostat and ,to install it, I neet to know what type of system I have: single stage heat and cool; multistage heat and cool; heat pump with backup heat; heat pump without backup heat; heat only; cool only. These are all the options. Thanks.

IT'S COOL ONLY MODEL.. ... Carrier 38CKC060 Air Conditioner

We have a honewell ST6400S central heating programmer and it has gone into service reminder mode, we have had our boiler serviced and the service engineer is unable to reset the system. There is apparently a key sequence using buttons and sliders that should be used to access an installer mode which then enables the system to be reset. The documents refer to a leaflet reference EN0R8542 describing this key sequence that Honeywell seem to not include with their products. Does any body know about

... Honeywell Air Conditioners

Need to know how many wires at the stat are used for a heatpump with 10kw resistence backup heat. and is a single state cool and single heat stat used

Sorry to read about your problem, I hope this helps you out.3 red white and yellowI tried to help you. Please help me and Rate/Vote on my response, thanks and good luck ... Goodman Air Conditioners

Hi guys, I try to solve this problem i have with my AC unit American Standard YCC048F. Short: The heating and cooling are ok, the only problem is the fan doesn't turn off even if heat or cool turns off. Some times even if i put the thermostat is on off the fan starts running. I try to find a relay for the fan but i don't know what can be the problem. Please help, for now i am switching on/off the unit to have it run. Thank you. Costi

If the unit has printed circuit board the relay maybe in it which has probably welded contacts, must change the pcb then or try tapping it, it might help or even, try off and on power at circuit breaker it migt reset the pcb. ... Air Conditioners

Our Jade J3000 thermostat has quit working. I simply used the turn up heat button which caused the numbers to keep spinning around and around and have no heat. Have tried following instructions for programming with no success. We have a senior in the home and need heat as temp is well below freezing here in Ontario. Please help us.

... Air Conditioners

Hi Guys, I work on a mine site and the temperature on my Mitsubishi model MSZ - 25GEVA split air con has been set and I cannot change it via the remote control. In any mode i.e. cool/ heat if you push the temperature buttons nothing happens. The remote works fine ON/ Off/ Fan etc but they've locked the temperature so it can't be changed. Even if I push the reset button the temperature still remains pre set. I'm of the thought that I might need to remove the batteries and hold done specific bu

... Mitsubishi MSZ09UN Air Conditioner

I have an older Day & Night / Bryant / Carrier downdraft central heater. It was a heat only unit but has an aftermarket AC unit added onto it. I have the latest PCB that adds the AC cooling feature controls (Factory Authorized Parts- HH84AA020). The thermostat terminal connectors are: C Y GC GH R W. I want to use an off the shelf 4-wire thermostat but don't know how to hook it up. Thanks, Bob Gienger Email: [email protected]

4 wire will not work properly.\015\012\015\012You will need a 5 wire minimum.\015\012\015\012Blue = common\015\012green = blower fan\015\012red = hot\015\012white = furnace\015\012yellow =AC\015\0 ... Air Conditioners

I have a Goodman PHK036-1 unit outside and it had a Lennox Thermostat. I want to replace it with a Lux DMH110 Thermostat and I need to know the wiring for this. I had someone help me last night but the Heater comes on in COOL mode and just the fan runs in HEAT mode. Thanks

Disconnect all wires to start.\015\0121)Go out to unit shut off power and remove electircal panel.\015\012\015\0122) Locate the terminal board where thermostat wires are connected. Write down where each color goes to\015\012ea ... Air Conditioners

Hi , I hope you can help me , I am an electrician living a remote part of New Zealand . A client of mine is using one of your units to heat their swimming pool and have been experiencing a problem with it .They have been trying without any luck to find someone who knows how to repair their unit in our area , so have asked me as their electrician to have a look at it . Namely they have lost temp control ? it either goes cold or just keeps heating up ? I suspect the thermostat control pot but w

... Air Conditioners

I have an amana rha36b2a heat pump and am trying to hook up a new thermostat. It's a pro 1 iaq t905 programable thermostat. I have hooked up the green yellow white and red (and ran a jumper wire from rh to rc). I also ran a jumper wire from W to Y. I ran the brown wire to C. The thermostat works great for heating but won't cool. When cool is chosen the heat comes on. Help! I know the O and B on the thermostat are the heat and cooling changeover valves but what should I do to connect them if that

... Air Conditioners

Honeywell Wireless System THM5320R Wireless system and thermostat startup ok. The issue I am having is that; when the thermostat is in cooling mode and the unit starts the reversing valve is in the wrong position and the system is heating. There is more than 3 degrees between the heat and cool settings on the thermostat. Thank you. mschaeff bryanshvac bryanshvac Rank: Master Rating: 75.00% , 2 votes make sure you thermostat o terminal is used fir reversing valve in cooling, or b termin

How old is the existing system? i do ac in florida and usually if its not the wiring, an old systems rev. valve may stick. a firm tap on the valve may solve your problem. ... Air Conditioners

I have a Lennox pulse 21 furnace. It will not turn on when I turn it to cool or heat. I checked the main computer module and the LED light is off. I had reset the furnace by using the switch next to the furnace, and this will not turn on the light. Is there anything else I need to check before I call a service tech to look at the main module? The switch to turn on and off the furnace with the removal of the bottom door may be bad. Is there anyway to check this?

The switch you are talking about can be checked. Turn power off to unit. Disconnect wires on both terminals of this door switch. Next use a meter that will show Ohms or just connectivity to see if switch is closed when pressed all the way in. You cou ... Air Conditioners

Have a stadt heating system about 11 years now. Now when we put the thermostat heater does not fire up so have to press the reset button on the unit and straight away it fires up.

... Air Conditioners

Dometic 15,000 BTU ac/heat pump (on heat pump mode), installed in a 2008 Holiday Rambler motor home. It is putting out lukewarm air. Only using 8 amps. I have turned it off at breaker, no change. Also, have tried a reset on duo-therm thermostat. No change.

... Dometic Rooftop RV Air Conditioner

I don't know how to set digital thermostat. Heat is coming out instead of air. I need to set the cool air.

Remove the front cover and check your wiring. r-red=power y-yellow=cool w-white=heat g-green=fan.... r-should be hooked up to r-h and a jumper wire-to rc...! ... Honeywell Air Conditioners

I have a window unit i just put in it is one year old and has not been used this summer it is only blowing room temp air and the it is on the cool setting and willl only work on high settign and auto i tried the reset button but the compressor still isn kicking on to get the freon in the unit working

If the unit is stored in any position *other* than the intended, normal operating position, the unit will not run correctly.Cooling appliances with compressors for refrigerants such as A/C units, refrigerators, freezers, etc., whenever mo ... Air Conditioners

My weatherking outside compressor isn't big enough to handle my cooling needs. It is 1.5 ton unit, can I put a bigger ac unit onto this one without changing my heating system which is sufficient?

If your indoor unit is 1.5 ton the answer is no \015\012if your indoor unit is 2.0 ton then you can jump to that size.\015\012Note :your duct system may have been designed for a 1.5 ton and may need to be reconfigured for a size increase ... Weather King 10AJA4201AH Air Conditioner

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || www.ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.1749 seconds