Having problems with your Air Conditioners ?

Reset button does this model have a reset button if so where would it be located


Answers :

It should be at the plug. should be a test and a reset, like a GFI outlet. if not there is none, let it cool down say a prayer or 2 and plug it back in.

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Reset button does this model have a reset button if so where would it be located


It should be at the plug. should be a test and a reset, like a GFI outlet. if not there is none, let it cool down say a prayer or 2 and plug it back in. ... Kenmore 72055 Air Conditioner

Gas furnance would only operate for about 3-5 minutes then turn off. Replaced gas valve on furance for a Rudd comerical A/C 4 ton unit model UKKA-A048JK10E. Now the blower fan turns on but the igniator and gas does not come on as before. LED light (flashes 5 times) on board indicates flame roll out switch is open. Need manual to locate roll out switch, does it have a reset button or does it need to be replaced?


The rollout switches will be located at the ends of the burner assembly and will have a manual reset. they must be manually reset to ensure that the problem has been corrected. Most units will go into a soft lockout for a time and eventually a hard l ... Ruud UAKA042 Air Conditioner

Where is reset button located on whirlpool split ac front panel? (Mastermind series chrome). Though I cleaned my filter the "filter" light is still glowing and hence i need to reset it but I am not finding the reset button. Please let me know where reset button would be?


Its inside the front panel at right side ... Whirlpool ACC108PS Air Conditioner

Where is reset button located on whirlpool split ac front panel? (Mastermind series chrome). Though I cleaned my filter the "filter" light is still glowing and hence i need to reset it but I am not finding the reset button. Please let me know where reset button would be?


Look at your remote carefully. There is a bal pen type push to reset filter button on the remote. Depress the rest button and it should reset. Also on the contol panel you can also reset it by depressing the mode and the UP temp arrow buttons for ... Whirlpool ACC108PS Air Conditioner

Where is reset button located on whirlpool split ac front panel? (Mastermind series chrome). Though I cleaned my filter the "filter" light is still glowing and hence i need to reset it but I am not finding the reset button. Please let me know where reset button would be?


... Whirlpool ACC108PS Air Conditioner

Where is reset button located on whirlpool split ac front panel? (Mastermind series chrome). Though I cleaned my filter the "filter" light is still glowing and hence i need to reset it but I am not finding the reset button. Please let me know where reset button would be?


Look real hard on the remote. There is a mini "use a ballpoint pen" push to reset filter button on the remote. \015\012\015\012Electronic control panel: (not all models) \015\012 Hold the mode button and the Temp Up arrow depres ... Whirlpool ACC108PS Air Conditioner

I need help locating the reset button for an old Miller HVAC (heat pump) - i had one of those micro-filters in and the compressor shut off - my A/C repairman friend told me the reset is now what I need to do but I cannot find the button and he hasn't answered his phone in 2 days - I don't have a manual and cannot find one online - it is an old unit with model number PCZD-030KB (?)


I don't believe " Miller" brand has a manual reset for high pressure. The disconnect box on the wall next to the out door unit is fused. It has a pull bar in it and has the fuses attached or behind it, depending on the box. The fuses are " slow bl ... Air Conditioners

I have a Fridaire AC window unit about 3 mos old. It just would not work with the buttons, then we unplugged it to reset it, and now it will just beep when we plug it back up and push reset, then it turns off and will not come on at all. It looks like from the side the model number is: FAA087(5 or maybe a S )A ....I have called the number on it, and I get recordings and then to call a LONG distance number and no one to help. That was Thurs and we sure are hot!!! Can you help???


How long do you leave it unplugged for? try a couple of hours to let any memory voltage dissipate and clear memory, then retry, also does it have any troubleshooting ideas in the owners manual, possibly a certain way of steps to un glitch unit and ma ... Air Conditioners

Our system suddenly stopped...there was a thunder storm but now evidence of a strike. I thought it might simply be the thermostat since it was blank. I replaced it and now have a beautiful programmable thermostat but no A/C action. Was told to check relay as well as reset...The unit is at least 12 yrs old but really would like to hold off on total replacement for a while. Can you help with location and ID of relay and reset button if that's even accurate. I'm going to go out and start takin


I have to assume that you have the thermostat hooked up correctly and it will call for cooling when turned down.\015\012\015\012From your description of the problem it sounds like the power circuit should be checked first. Locate the brea ... Air Conditioners

I have a Sharp portable room air conditioner model CV-P10NC. The power plug RESET button and TEST button will not click in order to check out the power plug as the unit will not turn on. They did test O.K. at first but the unit would still not come on. Can the power plug back be taken off to check out the fuse inside - or since it is a type of built in circuit breaker maybe it does not have a fuse inside ? The instruction manual states that " This air conditioner uses a fused power plug". The un


The fused9G.F.C.I.) cord you speak of is probably the G.F.C.I. built onto these units by design, can you or someone you know get access inside the unit and :Hot-Wire" the units cord and,bypass the power cord ( Just To Test the Unit)and see if it stay ... Air Conditioners

I have a RUUD air conditioner model UAKA-036JAS and the fan is not working on the outside and is not cooling on the inside. Where is the reset button so I can see if that will work or what would another solution be?


Well there is no reset button for this type of problem but to check the internal fuse of the fans or the power supply to them..............sodeep ... Ruud UBHC Air Conditioner

I purchased a Tower Quartz Heater about 16 or 18 months ago from Lowe's Home Improvement Store in Austell, Georgia. Now the weather has changed and I pluged it up and it will not work.I have tried the reset button and it still will not work. What do I need to do?I really would like to keep the heater. 1Touch The model #9200099004162. I really need this heater ASAP because I have a small baby in the house. Thank you for your assistance in this matter. My name is Elizabeth Maddox 4620 Hamlet


... Air Conditioners

My air conditioning unit stop working (outside unit). When I turn the unit I notice a buzzz sound comming from the unit. I have pressed the reset button on the unit to see it that would help but nothing happend. I check to see if there was electricity with a voltemeter and the unit is getting current all the way to the capacitor. I turned the power off to the unit to check if the capacitor had a charge and it did. What other things should I be checking? Also, the fand do not turn on! model numbe


Hi, what is happening is, you have power to the outdoor unit. I am glad you have a volt meter. This system is a split unit,condenser outside and indoor unit. This is what you need to check, and what the buzzing is, and why the fan and compressor will ... Ruud UAMB Air Conditioner

Is there a reset button on an intertherm furnance model g5ra0963-16. if so where is it located. thanks


... Intertherm Air Conditioners

Error code I am getting an E1 error code and don't know what it means? Any help would be appreciated. I get the E1 error code in the temp display as soon as plug in my model HWR 10XC6, 10,000 btu window A/C unit. I tried the reset button but that was of no help.


Do you still the warranty for this unit? maybe you should contact the company which you bought the unit. ... Haier hwr10xc6 Air Conditioner

No power HI, have a heat and cool a/c . its getting no power to the unit, it is getting power to the cord from the breaker box as the test light is on.I had pushed the reset button and it doesn't do any good. any help would be appreciated,thanks. Its round a year old. model # FAM18HR2A


Please check wether the fuse is blown, it surely is, replace it and enjoy cool air n hot water :) ... Air Conditioners

I can not find the reset button on my PAC 700T Pinguino and I no longer have a manual. Where would it be located?


... DeLonghi Pinguino PAC-700T Air Conditioner

Brivis Ducted Heating system. No display on Programmable controller inside hoiuse. Electronic Control (Model 14100) located on Heater (outside house)displays "Searching". Have turned off power and left for 1 hr then turned back on - no change. Tried resetting through buttons but no change. Have assumed Electronic controller has died - but can't find troubleshooting guide to prove. Don't want to waste $$$ if can be avoided.


Hi,I have an identical issue with my Brivis.Did you get a solution?Mine can be running, then goes blank and says searching. it will eventually come back.Just wondering if you had to replace the 14100?CheersJ ... Air Conditioners

Reset button for Ruud Achiever 14 heat pump/AC compressor? My Ac/heat thermostat was blowing fan on and would not turn off. I switched it off at the circuit box, and bought a new thermostat RTH221, wired it and it would not blow cool air when on cool nor warm air when on heat. Called the 800 number for Honeywell and tech said I had wired it correctly, to check outside and see if the compressor was running. It was not. This Ruud unit is only 8years old so I'm wondering if a reset button has


... Air Conditioners

Reset button Having to keep pushing the reset button to run the A/C unit. What would be the cause of the unit to keep tripping and having to reset it all the time?


... Air Conditioners

I have the Royal Sovereigh ARP-1400BLS, 1400ww. T/he ac turned on the first day I installed it and then after turning it off once, it would not come back on. I played w it for days making sure to leave it off for three minutes between each turn on. I floowed the direction for Power Plug Check: press the RESET button Insert the power plug in the electrical outlet Press the TESt button. If the circuit bresker is working you'll hear a clik (which I did usually hear) Press the RESET button


... Royal Sovereign Air Conditioners

I have a AMANA PTh153B50AE (PTAC unit). The air conditioner works fine. It is when I turn on my heater and it does not get warm. It just blows cold air. I have looked at the board and it appears that there are no bad spots on the board from where it had burnt. It appears that it may have a manual heater reset button. I am not sure if that will work but I can;t find the reset button. I am wondering if my heat pump has gone bad. Any help would be appreciated. Thank you.


I have the same problem, and I found the manual reset inside the unit. Turn the power off, and unplug the unit. Remove the outer cover of the unit ( inside cover ) , and remove the 2 screws holding the " wire mesh " in the front of the cover. Pul ... Amana PTH153B50AE Air Conditioner

Cental air unit stopped working, I replaced the capacitor which had blown apart, but the unit does not restart. It works when I push in and hold the button on what I believe is the relay where the power comes into the panel of the unit. Is there another fuse or reset button that needs to be reset within the unit. Any suggestions? The model # is AC1BN036-A and it's from about 1995.


You shud test the relay with multimeter for any shorting out or restricions.\015\012locate it and test it, if it is not beeping or showing zero its defective and you gotta replace that relay if its good, well you gotta locate the shorting out i ... GE Air Conditioners

Where is the reset button located on the outside unit and is there a reset button on the inside unit?


Try turning the circuit breaker on and off at your power box, it may work ... Ruud Matching Split Air Conditioner

Rudd furnace I have a RUDD furnace model UGPJ-07-NAMGR. It had stopped working, so I replaced the thermostat but it is not the thermostat. When I hold the furnace reset button, the furnace will fire according to the setting on thermostat(heat or fan). As soon as I let go of the reset button, the heater stops working. It does not matter what I do to the thernostat, the heater will not fire. I crossed the red and white wire but nothing happens. The heater is supposed to fire when I cross wire, ri


You have a safety limit switch that is either bad or needs to be manually reset. Some have little buttons between the two wires going to the switch that you can push to reset. If not they are automatic switchs then one is bad. You have to do an oh ... Ruud UBHC Air Conditioner

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || www.ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.0650 seconds