Having problems with your Air Conditioners ?

No cooling after power out, indicator lights pattern not in manual

\015 After a power outage while 2 of 3 inside units were in "cool" mode, each "cool" unit's left indicator light blinks and the right is off, the unit fan runs, but no cooling is provided. This pattern of indicator lights is not in the Operating Instructions.\015\012\015\012Resolution: The outside unit was not running. I flipped the outside unit breaker off, waited 30 seconds and turned it on; both "cool" inside units continued as before, not cooling. Started the third inside unit in "cool" and it operated correctly, cooling; turned it off. Flipped inside unit breaker off, waited ca. 1 min. and turned breaker on; both "cool" inside unit lights then displayed correctly and both operated correctly, cooling.\015

Answers :

The Mitsubishi units have to be reset by turning off the indoor units by switching the remote or thermostat to off. Then turn off the breaker to the outside unit(s). After 30 seconds,turn on the breaker and then you can turn on the remote for cool. If no lights come on on the inside units, most likely you have blown a fuse soldered on the main PC board. At this point, call your technician. A goos tech will be able to wire in an in-line fuse holder so if it should happen again, you can easily replace the fuse.\015\012\015\012If you do see a light or two come on at the indoor unit but the outdoor unit does not start after 3 or 4 minutes, sounds like you will need to call a technician. Most likely you have a blown fuse on the main PC board of the outside unit. It is not an easy one to replace.\015\012\015\012Good Luck!

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

No cooling after power out, indicator lights pattern not in manual


The Mitsubishi units have to be reset by turning off the indoor units by switching the remote or thermostat to off. Then turn off the breaker to the outside unit(s). After 30 seconds,turn on the breaker and then you can turn on the remote for cool. I ... Mitsubishi MSH09TW Air Conditioner

I have a WINIA WSH 188AL split unit. It will come on with the remote, give a green Cooling indicator light for 10 seconds then go to the heat indicator and a time delay indicator and the green cool light goes out and it never cools. What could be the problem?? and where can I get a manual with some wiring prints in it??


... Air Conditioners

We recently bought a MasterCool P700 evaporative cooler. We discovered that we could turn off the display light (makes sense with the large blue light lighting up the entire room at night) by hitting the power button a 2nd time after choosing selections (cool, sweep, etc.) However, it works only on an intermitent basis. sometimes, hitting the power button the 2nd time simply turns the cooler off. This feature is not covered in the manual. Please advise.


... Mastercool Air Conditioners

Right Indicator light blinks; left is solid; nothing in manual about this pattern


That is an error code.count how many blinks after a pause and that would be the error code. could be 4 , 5, 7, or 9.you could reset it by un plugging or removing power for ten minutes and try it again. ... Mitsubishi Mr. Slim MXZ30TN Air Conditioner

Everstar MPA-08CR. The unit is blowing air, but the cool and dry functions are not working. The green light that indicates that the compressor is on (which normally comes on and stays on in the cool and dry function) blinks and then turns off. I can?t find my manual and do not know who to call for help. I understand that this is a generic model sold under different names. I bought mine at Home Depot. What should I do? How do I fix it? Who do I call?


Hi,from your problem it can be deduced that the problem is from the starter relay attached to the compressor which supplies power to the compressor.it's probably weak or bad hence the light that stays on in the cool and dry function blinks as a resul ... Air Conditioners

I have a ducted vulcan climate control gas heater unfortunately there is no visible model no the only info i have is VULCAN CENTRAL HEATING CLIMATE CONTROL ILEC .THE MANUAL IS ALSO NOT AVAILABLE. When the heater is switched on the flame and fan comes on but the flame does not stay alight for more than 10 to 15 secs after several attempts the reset indicator shows on the remote have tried switching on and off power and restarting several times only keeps blowing cool air


You should locate the flame sensor and clean it. Take a look: ... Air Conditioners

We have a Fujitsu Halcyon wall mounted ductless unit (indoor Unit ASU15RLQ). It was installed in December 2007 and we've done regular cleaning of the washable filters etc. Now it is not cooling. There is a row of condensation droplets along the outside lower edge of the intake grill. Also when ever it runs, the indicator light is steady red not green. What does this unit need? How could I buy a replacement filter? The manual says after 2 years we should replace the filter- Model UTR-FA14.


Hi, first of all, you can get a replacement filter by contacting Fujitsu on (973) 575-0381, (866) 952-8324 toll free and you will be told the nearest Place around you where you can get it from.Secondly, your AC not cooling might be as a ... Fujitsu Air Conditioners

I have Sime Format Boiler ("30E" model) for central heating only. Suddenly it stopped working. So I grabbed its manual and followed all start up instructions but - no result! No even green indicator light (power is ON). Any suggestions?


... Air Conditioners

When Haier YL M07 air-conditioner is on the Power/Health indicator light is orange colour. The air from the cooling unit is not cool. When I press the HEALTH button the Power/Health indicator light turns green but the air from the cooling unit is still not cool. I would like to know what has gone wrong with my air-conditioner.


... Air Conditioners

The unit powers up and the fan blows well. The green light above the cool icon doesn't light up. Every 45-60 seconds the unit seems to strain and the fan decreases it strength for about 3-4 seconds and then it returns to blowing as bed ore. The unit does not seem to be cooling well. The unit is about 4-5 years old with less than 100 hours of use. It gets used maybe once a year. It was recently used last week, cooled great for two days and then began to function as described. Suggestions?


... Amcor ALTL-12000E Portable Air Conditioner

When unit is turned on the operation and indicator light are solid for about a minute then the indicator light goes off and the operation light flashes. The outdoor part of the unit does not seem to be switching on ( no noise or fan). Outside unit has power. Filters are clean.


It's communication error between indoor and out door unit.Comms Error, check your wiring, remove external pumps. Split/Multi - check volts from terminal N to 3 = 0 - 65 Vdc, Multi V - 4 Vdc terminals 3 and 4 ... Mitsubishi Air Conditioners

Power went off for approx 3 seconds, air con was on at the time, now the front panel of lights, eg: swing, operation, timer buttons are flashing and it is not responding to remote. We have turned off in power box and back on. As soon as the power button on remote is pressed, same lights flashing and no operation. Sorry we don't have a manual for it, any ideas would be greatly appreciated.


Hi. the control panel board has failed. it will have to be repaired or replaced. ... Air Conditioners

Kindly provide the following technical data for York Air Cooled Reciprocating Chiller Model YEAJ65ES7 (50 Hz Power Supply, Twin Compressors JS 63 + JS 44 Models) a) Nominal Capacity? b) Power comsumption at full load at ARI Parameters? c) Power comsumption at 20%, 40%, 60%, 80% at ARI relief parameters? d) Provide Technical Manual e) Provide Operation & Maintenance Manual


... Air Conditioners

New airconditioner (installed 5 days ago) not working. Turned it on for first time (after installers's demo)yesterday, left the room after it had been running about 30 min. Returned within 10 min to find it had ceased functioning, timer light flashing orange, power light no longer illuminated. Followed procedure in booklet (flashing power light indicates fault) and error code F99 came up. What can I do (I'm waiting to get intouch with after sales service.)


Do nothing on a brand new unit but let the installer or service tech fix it for free, if you go messing with it you may camoflouge the real problem and when the repair tech arrives he wont be able to observe the actual cause or fault and it will do i ... Panasonic Air Conditioners

My A/C unit is not functioning properly. When switched on by remote or by power source, the left yellow light will come on for a few seconds, then the yellow indicator light on the right and middle orange light all begin flashing. I have tried everything - resetting the remote, on/off from the power source, on/off from the remote, and all with the same effect. I desperately need the A/C function to work as soon as possible and have been trying all day to make it work. Please help!


It will be helpful if you provide the manufacturer name and model no. of your air-conditioner.\015\012\015\012Do you hear the fan or the compressor run? ... Air Conditioners

Not cooling and shutting off, indicator light flashes


The outdoor indictor light on my lg split comes on after some minutes on the one inside and the cooling has reduced please can any1 tell me what the problem is ... LG LSC121PMA Split System Air Conditioner

Amana AC I posted this a while ago but I have an Amana AP095R portable ac. It's about 5 months old. I turn it on one day and it stops working. The power indicator light which is normally a solid green is now flashing red. As well as it beeps. It beeps and flashes a total of ten times, one beep per flash of the now red indicator light. Not sure what to do.


Hi, the aircondationer compressor was stuck , the thermal control open the red light on , you may call fixya authorized repair service near you you just enter zip code . ... Amana AP099R Air Conditioner

No A/C My unit will power on and the fan works, however when I turn it to the Cool mode I can hear a click in the unit, the cool light comes on for 5 seconds or less, then it will click again and the light will flash 9 times. The warranty on the unit is 4 years however only covers parts, labor is $90 per hour......Is it just a fuseable link/circuit breaker?


It seems that that the overload of compressor is tripping on and off, either your compressor overload is defective or the compressor itself ... Danby DPAC8399 Air Conditioner

Panasonic Inverter CS-E12EKU timer indicator blink. The unit not work at all, I follow the manual instructions using the remote control but the instructions are not clear. Using other similar Panasonic model instruction clarify the process and get 4 seconds beep, 30 seconds power indicator on and the code F99 at the control. In the error code table for the similar model F99 means Outdoor Direct Current (DC) peak detection and instruct to verify the- Outdoor unit PCB- IPM (Power transistor) - Cop


Today I install a new unit Panasonic CS-S13KKP also have a same problem timer blink and the outdoor unit wont start. Error code is 11. after checking the problem, can not using a 3 cable cord, solve the problem using 4 Cable cord and its run ! ... Panasonic Air Conditioners

Doesn't turn on; power indicator light is green on the plug, unit beeps when plugged in, control panel lights up for a second and goes off. tried the power button on both the panel and the remote.


... Danby DAC12070EE Air Conditioner

I have purchase a Danby DPAC 13009 Air Conditoner. The manual reads that the system's front button will light up blue when it is in cooling mode. I have selected the cooling mode but the light stays yellow. What does this mean?


... Danby DPAC13009 Air Conditioner

My Sunpentown WA-1210E airconditioner stopped working. It emitted several beeps and the power light is blinking continuously. When I unplug, wait a few minutes and replug in the unit, it shows the same diagnostics: several beeps and the power light blinks continuously. What is the problem and how can it be fixed? Also, where can I get a user manual for this system? None on sunpentown.com.


Have you checked the water container in the unit? It has a float switch that when it is full it will not allow the unit to run so that it will avoid spilling water on to the floor. Hope this helps 2rns4u <*{{{>( ... Sunpentown WA-1210E Air Conditioner

Split AC 1200-BTU Kenwood Model ANK12P Pearl series Power lights ON but Unit does not become ON. Its power LED becomes ON but buzzer does not beep as it beeps with normal power ON,and no response from remote control. When manual button is pressed for about 5 seconds, its whole two(7 segment ) LEDs become ON and then blower motor and compresser power supply relay becomes on. then the 2 (7 segment) LEDs go OFF. and timer LED becomes ON then (compressor) power LED becomes ON, then sleep LED (all on


HE, I Dont Know where youre getting these #'s from but the only thigs comes up under kenwood model ank 12p pearl series is "GERMAN" websites and nothing I could understand websites. ... Samsung AS18A6RB Air Conditioner

Blinking lights... mega cool, timer, and power light are blinking. I emptied the water out of the ac unit like it says to on the back of it. Lights still blink and I reset the plug. It then will turn on and after a minute or so it blinks the 3 lights again and shuts off. What could this mean?


... Sharp CV-P10LC Portable Air Conditioner

Model, 42HQE009/012, Hi, When I start the unit in heat mode the OPERATION and PRE DEF lights come on as useual but only for 5 seconds instede of a couple of mins. then the pre def light goe's out, nothing happens for about 5 mins. and then the same two lights start to flash together with no response from the remote, the power has to be cut to get them off , the cool mode works fine. Thanks, David.


... Carrier 36KCARMS Air Conditioner

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || www.ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.1170 seconds