Having problems with your Air Conditioners ?

Kenmore 72189 Air Conditioner not power on

\015 My Kenmore 72189 Air Conditioner do not power on.I check brecker, power line, outlet and all is OK.This unit has digital control display and when I press power nothing come out on the screen. which part of this control box coud be bad?\015\012Thanks,aynos\015

Answers :

Inspect for any broken or burnt wires check thermastat compressor overload/relay selector switch and the control board

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My air conditioner will not turn on. (See below for a more detailed description.) I recently bought a used Kenmore Room Air Conditioner Model 580. 76129. It worked well for about a month (running almost continuously, usually on either energy saver or cool). About a week ago, I walked out of my room when the air conditioner was on, and it was off when I walked back in about an hour later. (The display was unlit, and it was not making noise.) The power button still does not work. The outlet


If you have a GFCI plug on A/C unit it may need to be reset at the plug. ... Kenmore 76129 Air Conditioner

Kenmore 72189 Air Conditioner not power on


Inspect for any broken or burnt wires check thermastat compressor overload/relay selector switch and the control board ... Kenmore 72189 Air Conditioner

The power cord for my Kenmore air conditioner is too short to reach the 110v plug.


... Air Conditioners

What is the power draw (in watts or amps) of the Kenmore 5300BTU room air conditioner? The unit is being powered off the grid by an inverter, and I think the user chose too light weight an inverter for the load.


5.8 amps. see page 9 (5300 btu is considered a 6000 BTU, 4800 is considered 5000 btu, sorta like ... Kenmore Single Room Air Conditioner

Kenmore 253.70121 air conditioner no power


... Air Conditioners

Kenmore 253.70121 air conditioner no power


... Kenmore Air Conditioners

How do I re-connect the power cord to the circuit board of the Kenmore air conditioner 580 76129300?


... Kenmore 76129 Air Conditioner

Plug trips and cuts off power supply - Kenmore Air Conditioners


As my air conditioner is under warranty, a technician is coming to my home tomorrow. Thanks. ... Kenmore Air Conditioners

I have 2 kenmore air conditioners, each has a power cord whose plug has a built-in ground fault/reset device. I wanted to shorten the cords, so I cut off the plugs and installed regular heavy-duty three-prong plugs. They are wired in correct polarity. However, on one a/c the compressor will not turn on. On the other, it's working but there is excessive fan noise. Did i do something wrong?


That ground fault ... Air Conditioners

I just replaced a power cord on my kenmore 58074156400 window air conditioner. now when i turn it on it clicks on and off, and the fan moves with each click. what can i do?


A few possibilities The fan switch itself may be at fault, or miswired. Are alll the connections where they should be and snug on the connector?There is a multi section capacitor for the fan and compressor motors. It can fail. ... Air Conditioners

Where does the wires hook up on power cable - Kenmore 75251 Thru-Wall/Window Air Conditioner


... Kenmore 75251 Thru-Wall/Window Air Conditioner

Kenmore window air conditioner model 253.710811, won't turn on? Power outlet reads 230 volts on test meter. Reset light on AC plug not lit up but beeps when reset.


... Air Conditioners

I am trying to install a new power cord on a model 580.72077 kenmore air conditioner. How do I get to where it connects to the unit.


I had to replace the power cord on mine. Hope this helps ... Kenmore 75085 Air Conditioner

Friedrich air conditioner stopped running. I was trying to find what the air conditioner was causing to vibrate near the unit. I moved the power cord while the air conditioner was running, pushed the wall plug to make sure that it was tight. THe air conditioner stopped running. I am a woman with no mechanical knowledge. My instinct tells me that I might have blown a fuse or short circuited something within the air conditioner.


This is very possible. Whenever a compressor is unplugged it should rest for about 5 minutes before turning it back on. This is because the refrigerant needs to balance. Otherwise a large amount of amperage may be required to start the compressor as ... Haier hwr10xc6 Air Conditioner

I have a Sharp portable room air conditioner model CV-P10NC. The power plug RESET button and TEST button will not click in order to check out the power plug as the unit will not turn on. They did test O.K. at first but the unit would still not come on. Can the power plug back be taken off to check out the fuse inside - or since it is a type of built in circuit breaker maybe it does not have a fuse inside ? The instruction manual states that " This air conditioner uses a fused power plug". The un


The fused9G.F.C.I.) cord you speak of is probably the G.F.C.I. built onto these units by design, can you or someone you know get access inside the unit and :Hot-Wire" the units cord and,bypass the power cord ( Just To Test the Unit)and see if it stay ... Air Conditioners

I HAVE JUST HAD A v-lEC asw h18a4hsa aIR cONDITIONER INSTALLED. wE HAVE POWER GOING INTO IT, THERE IS POWER IN THE BOARD, BUT THEN THE POWER IS LOST SOMEWHERE AND IT WILL NOT WORK. tHERE IS NO FUSE ON THE BOARD THAT WE CAN REPLACE IF FAULTY. PLEASE HELP THIS IS A BRAND NEW AIR CONDITIONER.


Take it back and or demand a new one there is a law providing replacement or refund providing you have the receipt for it ....this is my only answer as you should already know this ...if defective they must replace or refund your money ...don't take ... Air Conditioners

The air conditioner power cord light does not come, nor do the reset or power button work and the air conditioner will not turn on.


Check to see if you have power at the outlet. ... Whirlwind FH-778 Air Conditioner

Kenmore air conditioner 580.74053300 - Kenmore Air Conditioners


... Kenmore Air Conditioners

Kenmore 10,000 btu air conditioner - Kenmore 10,000 BTU Single Room Air Conditioner


... Kenmore 10,000 BTU Single Room Air Conditioner

Kenmore air conditioner model 35132 manual - Kenmore Air Conditioners


... Kenmore Air Conditioners

My frigidaire air conditioner cord got wet while being used and now it will not turn on. the end of the cord has "test" and "reset" buttons on the side of where it plugs in to the wall. the test button does nothing. the reset button does nothing when pressed in all the way but when slowly releasing the button the light for power will come on and blink power to the air conditioner repeatedly every second. nothing will stay on for more than 1/2 of a second and the fan will not start up at all.


Hello\015\012I would have the cord replaced.The test and reset is a ground fault,or a saftey device.\015\012If its not working correctly then have it replaced ... Frigidaire FAC124 wall/Window Air Conditioner

Dear FixYa Experts, I am a new home owner. I have a Kenmore Air Conditioner (heat pump?, see more details below) with Lincoln Gas Furnace. According to the former owner, the heating system will start heat pump first when the temperature is above -15C and then turn on the gas furnace when the temperature drops below -15C. Recently, when I turn on the heating system, only the gas furnace was always running but not the Kenmore air conditioner. And our average temperature was always above +5C for


... Kenmore Air Conditioners

Kenmore air conditioner - Kenmore Air Conditioners


Kenmore Air Conditioners: Brand Reputation and Who Makes 'em?According to the Sears archives, there never was an actual Kenmore, at least not a manufacturer by that name1. So how to explain the fact that one in five U.S. households owns a ... Kenmore Air Conditioners

I have aFujitsu split air conditioner, the remote control have got lost. I then bought a univarsal chaina remote control named Amely. I instaled the code for the air conditioner but the remote can only power it off and can not power it on. Please what can I do?


... Air Conditioners

Installing an 24,000btu air conditioner. The original wiring at that outlet has an double pole 20amp circuit breaker. The old air conditioner that was their was plug into an outlet box that sat on the face of the wall that had 30 and 250 on it. I had purchased an outlet that had 20 and 250 on it. The instruction for the wiring of the new air conditioner said 208/230 volts; 0 to 12amps; 20amp time delay fuse or circuit breaker. So tell me if I am doing the right thing with that 20amp and 250 volt


Yes your ok if they say the unit doesn't need to be changed in the incomimg power from 208 up to 230 volts or vice-versa,normally they classify motors as120/208/ 230 /460 volts, instead of 120/240/480 volts,but all line voltage varies in this voltage ... ACE -Air 24,000BTU Heat Pump A/C Free DVD Install it yourself Air Conditioner

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || www.ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.1102 seconds