Having problems with your Air Conditioners ?

EE in the display window

\015 When we plug in our new Maytag A/C we are immediately getting an EE in the display window. There isn't any mention of this in the manual...can anyone help.\015\012Thanks\015

Answers :

Hi, \015\012\015\012 I have been trying to get in touch with a service rep to find out but unable to get one. They wanted proof that I had purchased a unit. Its possible that your receptacle is not polarized right. By that I mean the two wires may need switched on the receptacle or maybe it doesn't have a good ground. You may want to try temporarily using an extension cord and try another plug. Most things will run good on receptacles wired wrong but with a computerized AC it may be seeing a fault. If you still need help I think the best way to find out would be for you too contact the store that you bought the unit from and make it their responsibility to find out what the EE stands for. If they cant, get the unit replaced and try again. If you do get hold of a service tech # from Maytag, please send it to me at [email protected]\015\012Hope this helps.\015\012kstfas

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

8,000 BTU Electronic Window Air Conditioner - ACQ158XR: my whirlpool window ac (Magicool 150QCi) displays ...


... Whirlpool Electronic Window Air Conditioner ACQ158XR

What is the error code EP on a GE window air conditioner? This air conditioner stops cooling and displays the error code EP......we have moved controls, checked breakers, checked plug, checked trip and reset on plug.......then sometimes it will display digital temp and start cooling again only to cut off cooling in a few minutes, few hours or it may run all day before displaying EP again....


Hi\015\012\015\012Unplug the machine and plugin after that push the reset button…Hope the machine will work.\015\012\015\012Let us know if you have something more to know else please accept the suggestion.\015\012 ... GE AGW18DH Electronic Room Air Conditioner

Hellos sir, I have haier 18-ax window AC, but I am facing display problem. all remote and display shows but while starting power light on the AC Display shows Stand by mode, Sleep Mode, Swing Light are on... And while using remote then Stand by mode off but sleep mode and swing mode and 1hour off light still on. Problem is that our AC not blowing air due to this reason. I think some switch are wrongly placed while playing with remote of AC. If you have some keys to repair AC with Remote.


... Haier Air Conditioners

What does E2 error on the display of my voltas vertis i window a.c. How the display can be normal


... Air Conditioners

Hi: The model # of my ac is acb067e. I took it out of the windows because it was dripping inside the room. After I reinstalled it E1 came up in the display window. It will not turn. This has happened before but it eventually started. Can you describe what to do to get it running again?


Your sensor is deffective change the coil sensor ... Amana Air Conditioners

EE in the display window


Hi, \015\012\015\012 I have been trying to get in touch with a service rep to find out but unable to get one. They wanted proof that I had purchased a unit. Its possible that your receptacle is not polarized right. By that I mean the two wires may n ... Maytag M7Y10F2A Air Conditioner

Maytag Window A/C use to display standard temp, now it is in metric?!?!?


... Maytag M6X06F2A Air Conditioner

I HAVE A FRIGIDAIRE WINDOW UNIT MODEL# LRA12HZU2 AND THE DISPLAY BOARD IS BLANK


... Air Conditioners

Friedrich window airconditioner displays...EP


... Air Conditioners

Window unit will not turn on. Error code E8 is displayed on the electronic keyboard. No switches work.


Hi! there.\015\012 there is an over load protector on circuit board,if you could reset on that, the supply on the system has trip off.your swictch will disable due to high current is flowing in the system,ther are several causes,filter drier ... Air Conditioners

My window ac is indicatin Ch on display ,what is the problem?


The CH is usually followed by a two digit number which would indicate the error. Hopefully you have cleaned the filter? ... Air Conditioners

"fl" indicator shown on the display of Carrier Window ac


... Air Conditioners

Have an haier model number hwr08xc7 window air conditioner will not come on has e1 in the display box


Thanks for your question!\015\012I'm sorry that you haven't received an answer yet.\015\012The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:1. the question is unclear, incomp ... Haier HWR08XC7 Air Conditioner

I have a admiral window a/c 18K btu. It has a remote control. It has an error code of ee in the display. What does this mean?


... Air Conditioners

My ge window ac wont turn on. When I plug it in all the lights come on but then they display turns off and I can't do anything.


... GE AJCQ08ACB Air Conditioner

My Sharp window air conditioner (model AF-S85FX) stopped working. Message E1 automatically appeared. So I cleaned air filter, then unplugged power supply and re-connected as per operating instructions. A/C started working, lasted 30-40 sec. and stopped. Displaying same E1 message. I repeated this action 5-6 times with same results each time.


... Sharp ENERGY STAR AF-S60FX Thru-Wall/Window Air Conditioner

I have a Fedders window unit air conditioner and when I plug it in a get an EE on the display. can you tell me what this means?


... Air Conditioners

I have 2 Frigidaire window a/c units, model# fam18eq2a1. The landlord tells me they are brand new. Both units have the same symptoms: about 30% of the time they power on and function normally. The rest of the time nothing happens when you hit the power button. After checking the appliance plug in to make sure is plugged in, I then hit the reset button, afterwhich the digital display lights up completely, beeps, and then usually goes dead, although 1 out of 15 times it will power on and cool f


... Air Conditioners

My window air conditioner displays an erroe code of EE and will not turn on


If you are technical How Knows the pull down your Machine and Perform Block Down Service ... Whirlpool Electronic Window Air Conditioner ACQ158XR

I have a Maytag A/C window unit model number M6Y14F2B , 14000 BTU and on the display screen its showing a error code of EE. I would like to know what this means and can it be fixed.


Why should I tell you how I fixed the problem for free if you can't even tell me how to solve this problem for free. I just wanted to know what the error code meant and if it can be fixed or is the unit junk. ... Maytag Air Conditioners

Haier window unit error code e1 is displayed and nothing happens.


Replace indoor room sensor. ... Haier hwr10xc6 Air Conditioner

Frigidare window air conditioner with remote control about 3 yrs old. All controls seem to be working except when the energy saver mode is suppose to shut down the unit / the display goes dark but the units compressor seems to be still running after shutdown?? Unit will not shut completely off unless we unplug entire unit. Unit also has a built in safety breaker switch on plug which works fine. Any suggestions?????


Hi,There might be many reasons. One of them would be Thermostat. If there is an issue with thermostat, ac would show the above symptoms.Check and let me know.Hope i helped you.Thanks for using ' Fixya ' ... Air Conditioners

I have a 2 zone Carrier Comfort Zone II thermostat sysstem. Remote unit displays -- in the window when trying to review or set the desired temp. The manual says to push the OUT button to get the temp back but that does not work. Any ideas?


... Carrier Air Conditioners

Error code I am getting an E1 error code and don't know what it means? Any help would be appreciated. I get the E1 error code in the temp display as soon as plug in my model HWR 10XC6, 10,000 btu window A/C unit. I tried the reset button but that was of no help.


Do you still the warranty for this unit? maybe you should contact the company which you bought the unit. ... Haier hwr10xc6 Air Conditioner

My a/c shut down and the window display indicated E1 - what is that problem?


If this is a Sharp AC, then E1 means Clean Filter.You can try cutting power to the AC (trip circuit breaker), that may clear the error.Clean or replace the filter if error is stil there. ... Air Conditioners

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || www.ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.0310 seconds