Having problems with your Air Conditioners ?

Heater will not work, trips the reset button constantly. No help from manufacturer.

\015 This a new unit, 7/06.Air was a problem when it was to hot, manufacturer claims to much humidity, sold be a pump for next summer. Now the heat unit is constantly cutting off after fifteen minutes if I am lucky. Is there a chance these units are in need of recall. The one day the units heat system worked it was wonderful. The next day it started the constant shut offs, I push the reset, runs about 15 minutes or less, will not turn on without the reset. I am fearful this will cause a fire.\015

Answers :

First of all I would make sure that you have it set up as instructed by the manufacturer guide or owners manual. If the plug is getting warm, replace the receptacle or try it in another outlet. Do not use an extension cord unless it is rated at the current that the unit is suppose to draw. If problem persist,contact Soleus International at [email protected] (888) 876-5387. They promise a 1 year warranty. http://www.soleusair.com/Consumer/index.htm\015\012If you are not satisfied with the unit and their warranty, contact the place you bought it from and try them. Report them to the BBB if still unsatisfied. Good luck.\015\012kstfas

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Heater will not work, trips the reset button constantly. No help from manufacturer.


First of all I would make sure that you have it set up as instructed by the manufacturer guide or owners manual. If the plug is getting warm, replace the receptacle or try it in another outlet. Do not use an extension cord unless it is rated at the c ... Soleus 10,000-BTU Portable Air Conditioner with Dehumidifier/Heater - MAC10

I have a AMANA PTh153B50AE (PTAC unit). The air conditioner works fine. It is when I turn on my heater and it does not get warm. It just blows cold air. I have looked at the board and it appears that there are no bad spots on the board from where it had burnt. It appears that it may have a manual heater reset button. I am not sure if that will work but I can;t find the reset button. I am wondering if my heat pump has gone bad. Any help would be appreciated. Thank you.


I have the same problem, and I found the manual reset inside the unit. Turn the power off, and unplug the unit. Remove the outer cover of the unit ( inside cover ) , and remove the 2 screws holding the " wire mesh " in the front of the cover. Pul ... Amana PTH153B50AE Air Conditioner

Heater stopped working. Fan works, control panel diagnostic check reports no failure code. Placard on front of unit says heater unit has manual reset, I can't find a reset button or breaker for heater. Help?


The front panel should be held in place by four screw at the corners or snap in place. Either remove screws or pull gently on top right corner to remove cover. You should see a red reset buttom type reset. Push it in to reset. Hope this helps. Thanks ... Amana PTC123D50AR Air Conditioner

I have a Nordyne Intertherm water heater in a 2004 manufactured home. The water heater is tripping the internal circuit breaker. The first time this happened I found that a wire nut had melted. I never had the burnt smell so do not know when it happened. All I had to do was replace the wire nut, push the reset and it started working again. After a couple weeks it is stopped working again twice. I push the reset and it works again.


... Air Conditioners

My reddy heater will not run for more than 1 1/2 minutes before the reset button trips. bypassing the reset button makes the heater work fine, is there anything wrong with this solution?


Yes a fire can occur ... Air Conditioners

I have an FP45 model pellet stove manufactured by Stove Builder International and I am having problems starting it. First I push the power button and it comes on for about 2 seconds and then I get a P message and it stops working. I have tried to reset, cleaned it and still not working. This stove is 2 years old, but new to us. I have read the manuel but can't figure out what could be wrong. Please help. Thanks


... Air Conditioners

Hi We have a GIANT waterheater 60gal 4500watt 94-12 Problem: The water heater doesn't heat up anymore since about 24hrs. It's not the breaker we checked that. AND if we would like to RESET with the reset button it doesn't work either. Thanks for your help.


Hi,\012Yes, the reset probably is tripped...push in the red button hard Then turn it on and try it...Check out this tip..How to replace the Thermostat and Element for ... Air Conditioners

I have a amcor model PLM1300E and the gfci on the end of the cord will trip for no reason that i can see, when i reset the button eveything works fine for a little while and all then it will trip again? i checked the connections inside the cord and eveything is tight, what could it be. thanks for the help


Additional information: I found out that by setting the [email protected] degrees or lower, the unit does not trip the gfi if that is any help. I didn't want to have to run it by turning it off when it gets too cold, and sleeping under a comforter. It does ... Air Conditioners

Rudd furnace I have a RUDD furnace model UGPJ-07-NAMGR. It had stopped working, so I replaced the thermostat but it is not the thermostat. When I hold the furnace reset button, the furnace will fire according to the setting on thermostat(heat or fan). As soon as I let go of the reset button, the heater stops working. It does not matter what I do to the thernostat, the heater will not fire. I crossed the red and white wire but nothing happens. The heater is supposed to fire when I cross wire, ri


You have a safety limit switch that is either bad or needs to be manually reset. Some have little buttons between the two wires going to the switch that you can push to reset. If not they are automatic switchs then one is bad. You have to do an oh ... Ruud UBHC Air Conditioner

I have a Vulcan central gas heater with a touchpad controller. The controller beeps but has no display and the system will not work. I have turned the power off and tried pressing the reset button on the system but doesn't solve anything. Help!


... Air Conditioners

My Gold Star A/C had a wire trip, I unplugged then hit the reset button multiple times. Now the reset button is not working. Does the Plug have a fuse in the little box I could have blown? And why is it tripping to begin with?


How do you replace the cord? ... Goldstar KG6000R Window Air Conditioner

The window unit has ran for 3 years never tripped the breaker now it only trips the reset button on the cord does not trip the breaker when i reset it it works great for a while it stormed the night it started this


Well they do go bad was it eclectic storm it might have fired it. but make sure the unite is clean both front and back if have air compressor blow it out,Ok! hope this helps Paul ... GE AVX10AD Air Conditioner

I have a Fridaire AC window unit about 3 mos old. It just would not work with the buttons, then we unplugged it to reset it, and now it will just beep when we plug it back up and push reset, then it turns off and will not come on at all. It looks like from the side the model number is: FAA087(5 or maybe a S )A ....I have called the number on it, and I get recordings and then to call a LONG distance number and no one to help. That was Thurs and we sure are hot!!! Can you help???


How long do you leave it unplugged for? try a couple of hours to let any memory voltage dissipate and clear memory, then retry, also does it have any troubleshooting ideas in the owners manual, possibly a certain way of steps to un glitch unit and ma ... Air Conditioners

Message on pad CE-09 keeps coming up. Cannot work pad at all. No sign of re-set button. We have a Spa Power 1000, 3.5 Spa was working, we emptied it and re-filled it. Then it would not start again. We turned it all off and tried again. No luck. Cannot find reset button. Had professional to look as well and he couldn't find it either. Please help


... Air Conditioners

Bonaire Vulcan gas ducted heater furnace BV530E 120MJ/hr 2007 After power cut the heater stopped working. Pressing the reset buttons (set time/program and enter) together has not got it going. Is there another reset sequence I should press? Thanks. Ross Martin


... Air Conditioners

I purchased a Tower Quartz Heater about 16 or 18 months ago from Lowe's Home Improvement Store in Austell, Georgia. Now the weather has changed and I pluged it up and it will not work.I have tried the reset button and it still will not work. What do I need to do?I really would like to keep the heater. 1Touch The model #9200099004162. I really need this heater ASAP because I have a small baby in the house. Thank you for your assistance in this matter. My name is Elizabeth Maddox 4620 Hamlet


... Air Conditioners

I have a kenmore power miser 8 water heater no hot water even though i am a girl i worked in a hardware store for 8 yrs so i opened spot to top element and pushed reset button. it worked for a day. today someone else tried it because it was not working again when i came home there was water squirting out of the pressure relief valve. should I test or figure it is stuck and replace


The good news is this is a fairly common problem. Generally when a water heater pilot light goes out it is due to a faulty thermocouple. Replacing this is simple, takes just a few minutes and the part can be found at almost any hardware store.\ ... Kenmore Air Conditioners

Our Stadt heater is not working. I have tried to turn the termostat off then turn it back on & that didn't work. I also tried to press the reset button for 5 seconds then turn the termostat back on. This didn't work.


O my friend i hawe a same problem in macedonia it hawe a mystake in elektronk part in airconditioner...and maybe is dthe outside part of split termik is not ok maybe ... ... Air Conditioners

I have ventless natural gas heater , u can lit the pilot , but when u let up off the button the pilot goes out . have replaced thermocouple the same problem pilot will not stay lit. have also used air compresser blew it out ,stillwill not work is there adjustment screw on the gas valve or reset button on the gas valve .


When you light the pilot, hold the button in about 1 minute to satisfy the thermocouple. Once the thermocouple is hot and satisfied, turn the gas to "ON". You may have to extend the time a bit, but 1 minute is usually enough.Best regard ... Air Conditioners

My coleman Mach Rv air conditioner with built in heat strip keeps tripping it's internal circuit breaker when running for any length of time. Just replaced heat strip with new one experienced same issue. I ended up with the fan continuing to run but only cold air comes out of the vents! When I removed the old unit and reset the circuit breaker it too worked again. Have no idea what is causing this to happen. The airconditing part of unit works just fine??? HELP! Ron


There should be an overload protection device in series with the low voltage wiring(t-stat wiring) Is it resting on the heat strip or too close to it? It is a saftey device to shut off the heat strips if the fan quits or a fire in the heat strip sec ... Coleman Mach III Air Conditioner

My Frigidaire FSA 12 PA5C : - indoor unit shows a blinking ELECT LED + TIMER LED always ON + OPERATE LED ON - no fan working(no air coming out off indoor unit) - outdoor fan not working Please help. Any RESET button somewhere ?


... Frigidaire FAS184 Air Conditioner

We have a Haier HWfo5xc7-2 air conditioner. Today, when I went to turn it on, there's no power. The outlet works fine. What could be wrong? It worked fine yesterday. I pressed the reset button? Does that help? I've owned the unit for about 1 year, but have somehow misplaced the instruction manual.


You can download your product manual by going to this web-site and typing in your model number:http://haieramerica.com/en/support/modelsearchI checked the troubleshooting guide in the manual but it only lists the obvious such as is the un ... Air Conditioners

I got brand new GE air condition and accidentally I pushed test button located on plug (So green light on plug turned off). I tried to start my AC by pressing reset button. But somehow it?s not working. Please Help me


That is a circuit protector...just like what you would see on a bathroom outlet. It is possible the switch is bad and when you pressed test...it stuck in the open position and will not reset. I would unplug unit and firmly press reset from a couple ... GE AJCQ08ACB Air Conditioner

I have vulcan ducted heated model no. 9255. The comfort control is reading the room temp as 35C when it is actually 11C, yes its freezing here. As the room temp is at its maximum reading the heating is not working. I have tried removing the batteries and restarting, the reset button and resetting the identity code, all to no avail. help! Patricia


I replaced the batteries, even though 'battery low' message was not displayed. this fixed my problem. I wish I'd have just done that to start with. ... Air Conditioners

Starting blower I have an amana 80sse heat furnace that will not come on. We have no reset button. I have off both of the plates, I can push a button on the bottom that will turn on the fan but then it goes back off and the heat is still not working in my house. Please help 49degrees outside tonight.


... Amana PTC074B25AE Electric Heat Air Conditioner

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || www.ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.0911 seconds