Having problems with your Air Conditioners ?

Getting Error E3 on my portable AC unit.

\015 I have added a motor to drain the water out directly from bucket any suggestion\015

Answers :

You need to get on-line and find the service manual for your unit. If the manufacturer doesn't have a down-loadable one, they will usually mail or fax you one. Once you have it, you can identify what the error code is and then work from there. It could be something as simple as a dirty unit. All these units are different in regards to error codes.

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

NewAir AC 12100E portable air conditioner unit won't get rid of P1 error status. It's new out of the box.


... Air Conditioners

Hi, I have an LG portable air unit..9000 BTU. Ive had it about 4 years...and now all the sudden Im getting "E3" error...in my instruction book it states "E3 = unit-abnormal protection, to avoid occurrence of unit damage" I feel like a complete dolt because IDK what this even means....apparently it means it goes on E3 to prevent more damage. It works a good...30-60-90 minutes, E3...I reset, it works again for another 30-60-90, and E3 again...so now my question(s) 1. How do I fix this? 1a.


... LG LP1200DXR Portable Air Conditioner

Getting Error E3 on my portable AC unit.


You need to get on-line and find the service manual for your unit. If the manufacturer doesn't have a down-loadable one, they will usually mail or fax you one. Once you have it, you can identify what the error code is and ... Air Conditioners

Unit does not get cold. E2 error code - DeLonghi CF210 Portable Air Conditioner


E-2 Indoor coil sensor defective. Replace it. ... DeLonghi CF210 Portable Air Conditioner

E1 error code displays when unit is plugged in I have a wall unit with about 10,000 BTU capacity. Two days ago, it quit working and displayed the E1 error code. I unplugged the unit, let it sit for 10 minutes and plugged it back in. It started right up and worked fine until this afternoon, when it once again shows the E1 error code. What does the E1 error code mean and how do I get this unit working again? [email protected]


Highly annoying issue error code E1. After hours of fan operation, the error code E1 will appear on the seven segment LED temperature display. This error code is intended as a reminder for the user to clean the air filter. However, ... Haier hwr10xc6 Air Conditioner

I get fault code 91F from my air conditioner - Panasonic cs-pe12dke. The unit is not working. When I reset the error the unit works for a while (heating) and then I get the same error.


... Panasonic Air Conditioners

I have a sanyo split air conditioner unit. The indoor unit is a rs2422b and the outdoor unit is a c4822. The #26 led is flashing which indicates a communication error between indoor's main and sub unit. I checked and cleaned all the connections. The unit worked for a couple days, but now I am getting the same error code. Is there a problem with the board in the unit.


... Sanyo Air Conditioners

Hi. I have a LG heat pump/air conditioner. A split system with 2 indoor units. Model LMN095HV and LMN125HV. After a power failure by our local power company, I am getting a CH 05 error code. I have turned off th power to the units and waited several minutes and turned it back on with no luck. I know the code means poor or no communication with the outside unite. And I am getting the same code on both inside units. an you help? Thanks, Peter C [email protected]


Hi, this error is a communication error between your indoor and outdoor unit, check all wiring and connections - ch 5 is a communication error between the indoor unit and the outdoor unit.\015\012You can try turning the breaker off ... LG LSC183VMA Split System Air Conditioner

I have a Fujitsu Cassette reverse cycle air conditioner - Model AUT25rl Indoor Unit with an AOT25RZAL Outdoor unit. the remote control panel is indicating an error condition eo-oo which according to the manual is a Communication error between the Indoor unit and the remote controller. How do I get this fixed?.


... Air Conditioners

Hi, I have an LG portable air unit..9000 BTU. It is model number Lp0910. Ive had it about 4 years...and now all the sudden Im getting "E3" error.Now, in my instruction book it states "E3 = unit-abnormal protection, to avoid occurrence of unit damage" I feel like a complete dolt because IDK what this even means! So anyone who can tell me what this means...in easy terms, please tell me because I got no idea! Apparently, what Im getting is it means it goes on E3 to prevent more damage. But what is


... LG Air Conditioners

Error code I am getting an E1 error code and don't know what it means? Any help would be appreciated. I get the E1 error code in the temp display as soon as plug in my model HWR 10XC6, 10,000 btu window A/C unit. I tried the reset button but that was of no help.


Do you still the warranty for this unit? maybe you should contact the company which you bought the unit. ... Haier hwr10xc6 Air Conditioner

I have an Amcor 18000 BTU Mini-Split A/C with Heater and Remote. It has never run more than two days and then I get E4 error code. It is difficult to get anyone to service these units in rural areas. I have a guy who works on it and is a licensed HVAC service person but needs some guidance as he deos not normally work on mini-split units and does not know Amcor at all. As far as i know last time he put more coolant in it. I want to purchase several more mini-split units and I have a pla


CLICK HERE for the manufacturer site and your owners manual.\015\012\015\012E4 is an "Abnormality of Outdoor Unit."\015\012\015\012This could be ... Air Conditioners

I have an NewAir 12000H Portable Air conditioner with a heat pump. The problem is that the heat pump no longer seams to be working. The desired temperature is 79 degrees. the unit never gets above 75 degree. when it actually gets that high it because my heat from the house has turned on. once the heat goes off then the unit goes down to 72 degrees and stays there until my heat comes back on. whats wrong with the unit? is there anything that i can do?


It sounds like the actual control module, the "brain", of this heater / air conditioner has failed and can't sense when to kick on the heat any longer. Have you tried just unplugging the unit for a good 5 minutes minimum and seeing if it will help " ... NewAir Air Conditioners

I purchased an Amcoraire split system unit for my 2 story garage. Licensced electrician did the wiring and licensed HVAC co. installed the 2 indoor units and outside unit. Outdoor unit is Model # AOM 243 HX 24000 BTU Indoor units are both Model #AWM123 HX, 12000 BTU each When I turn the unit on, it runs for about 60 seconds and then I get an error code on the inside wall unit that says P7. My manual says this has something to do with voltage. I had the power company come out and they show the


Since the manual says the error code has something to do with voltage it means the voltage is either too high or too low. And as the electric company says the voltage is within limits the the error is as a result of the voltage fluctuating. All you h ... Amcor Air Conditioners

Hi, I have a Samsung SH09BPD air conditioning unit and I'm getting error code 14. I wondered if you would know what this meant and if you could supply me with somewhere where I can get an error code sheet?


... Samsung Air Conditioners

My son gave me his portable air conditioner but did not give me the instruction book. not sure on the safety features nor how to run. it is a conviar portable refridgerated air con. model KY-32/Xc (co2) 002118 as my son is out of reach at the moment and I need to run this unit, I would be please if you caould get back to me asap. or let me know of a site to get a manual. thanking you for your time. R.Casey.


SERVICEMANUALS @ COST\012www.mauritron.com\012Manuals at free download: ... Convair Air Conditioners

We are getting an error message on our Friedrich AC (model SS10J10R-1) unit that reads either F5 or E2. What could be causing this? Thx E2 or an F5 error. Can't get the air conditioner to turn on and the timer light is on and won't turn off.


... Friedrich CP06C10 Wall/Window Air Conditioner

Circuit breakers tripped, had to replace fuses in the outdoor disconnect panel, after replaced fuses and turned on the breakers, I get F1 Error in air handler display which indicates a communication error between the handler and outdoor unit. I need some guidance on how to troubleshoot the boards and where to get the boards.


... Amcor Aire AMS241HX Split System Air Conditioner

Hi I have an E1 error message come up on my head unit ( 8kw inverter) - Kelvinator. I switched it off at the circuit breaker and then back on again...no poblems for about 3 min then shut down same error message ? WTF ? the unit is only 3 months old and does get used 24 / 7...


Hi\015\012E-1 error means coil sensor (cooling) defective or faulty room temperature sensor. You need to Replace it. \015\012Please get back to us if you have further query else please accept the sugge ... Air Conditioners

I have a Sharp portable a/c unit (cv p10nc) which I need to get intothe interior. My sun room gets a lot of dust from the decomposed granite in my landscape and I believe there is build up in the unit. I've taken out the 6 screws in the back but do not know how to take off back cover w/o damaging it.


See if you can locate a diagram of all parts on the net that may help you as it is not easy to type step by step ... Air Conditioners

We have a Fujitsu ASY-40UIM3 air conditioner here in Spain. We had to move the outdoor unit yesterday and since then we cannot get it to work. We are looking for error codes to help locate where the problem lies. The red light on start up goes off and we have a flashing green light (timer maybe?) that continues to flash at regular intervals. This outside unit was moved by a qualified engineer and the air-con worked perfectly up until the move. We cannot get heat or cold air.


There are two things that can cause this.\015\0121. Is the high voltage line energized. Is the power coming to the unit, make sure the disconnect is not tripped or manually shut off or pulled out and reversed. Check that the circuit breaker ... Air Conditioners

I have a carrier Modle No. 38YXA042300. I am getting an H5 error message on my Thermistat Control. I have run the Fan only mode and the fan in the air handler unit works fine. On the unit when I ingage the manual override, the condener unit and fan motor runs and cools. The unit will not run when I put the Thermidistat on Cool mode. Can you help me. Andrew Construction Mangement Speicalthes, Inc.


On some carriers they have a lock out feature outside to reset shut down power to furnace for 90secs. and then restart ... Air Conditioners

I have a friedrich PTAC unit model # PDE15K5SDC. I am getting an error code of 06 which is for units with a heat pump. I have cleaned my filters and coil-no restrictions. The unit was purchase with our sunroom in the summer of 2009.


06- means short of gas in the system. Call repairman for check and rectify the leak. ... Friedrich CP06C10 Wall/Window Air Conditioner

My Everstar portable air conditioner model# MPK-10CR-1 will not drain into the bucket that comes with it. It is draining into the tray at the bottom of the unit then the unit turns off when the tray is full. Can you tell me how to get this unit to drain into the bucket?? thanks robin


Simple I believe...just run a weed eater line up the whole in the back where you have the clear tube. You can take the little back door off the power cord area to see inside where the water drips into the little tray before it goes down the hose tube ... Air Conditioners

I have a Mitsubishi Mr Slim PK36FK3 and i get error 8 on the codes. I have cleaned the filters and checked to see there is nothing blocking the condenser fans. The fuses do not blow and the breaker does not trip. The unit stops and the green power light flashes with error P8. I can turn it off and on again and it will run for a while. Then the same error messages comes up. What is the problem????


Hi\015\012\015\012There are many things that can trigger that code. The most likely is a power problem...ie. Outage. Reset, and Recycle the power off and on and it take off and run.Other things to check are:1 Wrong wiring of I ... Mitsubishi Mr. Slim MXZ30TN Air Conditioner

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || www.ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.0785 seconds