Having problems with your Air Conditioners ?

Carrier Thermostat Displays Error Code E3

\015 I have a Carrier gas furnace and airconditioner with a heat pump and humidifier. The display is giving me an error code of E3. The manual say the code imples the outdoor temperature sensor is failing.\015\012\015\012Any idea's on how to fix this?\015\012\015\012Thanks, Amit\015

Answers :

Carrier Air Conditioning display an error code E5 and then swtich off
Check the outdoor sensor and replace if necessary.

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Carrier thermostat displays error code E2 - Carrier TSTATHPP 7-Day Programmable Thermostat


... Carrier TSTATHPP 7-Day Programmable Thermostat

Carrier Thermostat Displays Error Code E3


Carrier Air Conditioning display an error code E5 and then swtich off ... Carrier TSTATHPP 7-Day Programmable Thermostat

I have a dometic roof mount ac unit with the single zone digital thermostat . It now shows error code E1 on the display. Reset the breakers, checked all connections , Etc and still displays same error. Error code is lost connection between thermostat and control box. Checked control box and all connections seem fine and NO burnt smell. Any ideas?


It could have the sensor wire not plugged all the way or maybe a broke sensor wire from console to condenser control ... Air Conditioners

Carrier heat pump thermostat displays error code E3


... Air Conditioners

Error code "E3" displayed on thermostat on Carrier 38YXAO42 system. What is the problem?


Bad Thermastat replace it. ... Carrier Air Conditioner Accessories Air Filter

My outdoor heat will not operate. It is a Carrier 38YRA042330, with a Carrier Thermidistat thermostat and a Carrier Air Handler 40FFKB005300. I have an H5 error code on the thermostat will I put it in Heat mode and raise the setting to call for heating. I changed the air filter on the air handler when I realized the heat pump was not operating. The air filter was pretty dirty. The system will operate in aux/emerg heat mode, with the fan in Auto or On mode, and will maintain the thermostat


You need to go oside and look for a red reset button on the unit. you tripped the high ressure switch when you let your filter get that dirty. go check on this and when your done if it still is not working then ask me more. ... Carrier Air Conditioners

Pilot is not trying to light on my carrier comfort 80 (electric pilot). I was getting a error code of 13 that has cleared but now have an error code of 33. I have tried turning the unit off by using the thermostat and the circut breaker. Any ideas? Thanks for your help in advance.


13 is a pressure switch error code. Check the venting for any blockage of snow, ice or debris. Make sure the air filter is clean. Check the condensate hose and drain and pump if you have one. Check the pressure switch to make sure there is no moistur ... Air Conditioners

I have a carrier heat pump that will run for about 5 minutes before tripping a breaker and then displaying an E2 code on the thermostat. It will run fine on auxillary heat but not in heat or cool mode without tripping breaker and displaying E2 code.


Sounds like something is going on with the compressor or the outdoor unit. Call a service company ... Carrier TSTATHCP Programmable Thermostat Air Conditioner

Thermostat showing error code E5 - Carrier TSTATHPP 7-Day Programmable Thermostat


E5 Outdoor activation of compressor over heatprotection or motor lock1.Condenser block-Clean it. 2.Less rpm of motor-replace capacitor. 3. Motor Lock-replace motor. ... Carrier TSTATHPP 7-Day Programmable Thermostat

E1 error code displays when unit is plugged in I have a wall unit with about 10,000 BTU capacity. Two days ago, it quit working and displayed the E1 error code. I unplugged the unit, let it sit for 10 minutes and plugged it back in. It started right up and worked fine until this afternoon, when it once again shows the E1 error code. What does the E1 error code mean and how do I get this unit working again? [email protected]


Highly annoying issue error code E1. After hours of fan operation, the error code E1 will appear on the seven segment LED temperature display. This error code is intended as a reminder for the user to clean the air filter. However, ... Haier hwr10xc6 Air Conditioner

I have a carrier natural gas forced air furnace that stopped working, it won't light. It is displaying three error codes: 31; 11 & 13. The filter was changed, but the blower fan has been sqeaking for a while and I had to temporarily disconnect the combustion air. I'm guessing one or all of these things are the cause, but don't know how to reset the panel.


To reset the panel disconnect the power for 5 minutes and put the power back on.If you need more help troubleshooting please post back ... Carrier Air Conditioners

I have a split-carrier model 42SM5C Who displays an error code 4 what to do.


... Carrier Air Conditioners

How do you re-set error code for "change filter" when filter has been changed on Carrier programmlbe thermostat


Clean Filter Feature -The thermostat will display the CLEAN FILTER indicator when it is time to change the filter. Press the Reset Filter button to restart the timer after the filter has been changed or cleaned. Helpful? ... Carrier TSTATHCP Programmable Thermostat Air Conditioner

My Heat will not work on my upstairs unit. I am getting an E2 error code on my carrier thermostat. what does that mean?


The e2 code on a carrier comfort zone thermostat is indicitive of the external safety sensors which are located on your units ductwork in the attic. the e2 code are the hpt/ and lat sensor codes. the hpt is the heat pump temperature sensor and the l ... Carrier Air Conditioners

I have a Carrier Comfort Zone 4 zone thermostat that is showing a code 5F 03 in the display and wont show any temperature info. Any ideas?


... Carrier 38CKC060 Air Conditioner

LG PACKAGE UNIT RUNNING OK, BUT BETWIN 2/3 DAYS UNIT TRIPPED ON CH-16,THERMOSTAT DISPLAY CODE,(CIRCUIT"A"LP PRESSUR ERROR) WE CHECED SYSTEM IS OK.WHAT IS PROBLEM THIS UNIT.


Outdoor unit suction sensor fault. Disconnect from PCB and measure resistance. 10 kOhm at 10°C and 4 kOhm at 30°C. If OK replace PCB, if not replace sensor ... LG Air Conditioners

Good Morning: The display on our Carrier Comfort Zone II t-stat shows error code "E6". The unit is on auto and should be heating, as it is 30 degrees here in northeast Florida!!! The unit outside is running but the heat is not circulating inside. Let me know if you need any additional info. Thanks in advance for your help! MARK


... Air Conditioners

Hello all~ I have a Carrier WeatherMaker 8000 & it is turning on by itself even though the thermostat is NOT sending the turn-on signal. When this happens, the flame does NOT come on nor does the main fan come on... but instead just the pre-stage fan blower. The duration is 5-10 seconds & the frequency varies from 3-20 times/hour. Also, there are NOT any error codes flashing. Any help would be greatly appreciated! Thanks~ Joey


It sounds like the control box or ECM is going bad. ... Carrier XHB123D X/Y Series Heat/Cool Air Conditioner

I have a carrier infinity system. On the thermostat it reads "sens error" where the outdoor temp is normally displayed. The inside unit is running but the outside unit is not. Any suggestions?


A burned or pitted contactor will/can cause a unit to not run. Outside fan. Just thinking out loud. Start with low voltage check at t.stat then check outside low volt. Set t.stat to on. If fan engages at least your transformer is good. Next set calli ... Carrier Air Conditioners

Hi, have an error code f1 14 on my thermostat display for bonaire vulcan ducted gas central heating system. have tried resetting - any ideas. Thanks


... Air Conditioners

Carrier Programmable Thermostat - E5 Code


I "rebooted" the thermidistat by opening it up to disconnect it from it's power supply, waited 30 sec, and closed it up again. After a few seconds E5 went away and the indoor temp appeared. The A/C started up after about 5 minutes. It seems to be wor ... Carrier Air Conditioners

What is the error code EP on a GE window air conditioner? This air conditioner stops cooling and displays the error code EP......we have moved controls, checked breakers, checked plug, checked trip and reset on plug.......then sometimes it will display digital temp and start cooling again only to cut off cooling in a few minutes, few hours or it may run all day before displaying EP again....


Hi\015\012\015\012Unplug the machine and plugin after that push the reset button…Hope the machine will work.\015\012\015\012Let us know if you have something more to know else please accept the suggestion.\015\012 ... GE AGW18DH Electronic Room Air Conditioner

Error code on Enigma SLR-35 air conditioner. The error code is L1, air con will come on for a minute or two and then shut down displaying this error code. I don't have the manual for this air conditioner as it was in a house I just purchased and was just wondering if anyone knows what this error code means before I call in a repairman to investigate. I have tried cleaning the filters and resetting my circuit breakers for the house. No success obviously. The air that does come out for the minute


... Air Conditioners

My display for my Carrier programmable thermostat (no model number of the book or on the unit) goes blank for a minute or two and comes back on with "dF".


... Air Conditioners

I have an Innovair/Multi Zone, 12000 btu/h Inverter mini split console displaying EF error code after cooling for about 2-3 minutes and then blowing hot air when this error code appears. Then, after 2


... Air Conditioners

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || www.ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.0853 seconds