Having problems with your Air Conditioners ?

Unit will not operate

\015 Unit is less than a year old. \302\240All filters clean etc. \302\240Unit will not start up. \302\240On a call for ht the red indicator light blinks showing communication between the remote and unit, then a green light starts blinking. \302\240Thought it was a timer issue but I think I have ruled that out.\015

Answers :

\015\012Find your manual and check the code of the blinking green light. It will give you the resolution for your code. If you still have issues, post a comment back on this thread and I will be able to help you. You will need your model number for the website.

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a MS24NN A/C unit The remote will not operate the unit but the unit will operate by pushing the button on the unit itself . I know the remote is working properly because it operates the other unit. What parts do I need and what is the part no.

... Mitsubishi Air Conditioners

I have Fujitsu air conditioner Model abt45rba3w Serial t000147 The unit will not operate. The red operation light is flashing fast continuously and the a/c unit will not turn on. The timer light is green and flashes only twice occasionally. All the unit will do is swing the vents but nothing comes out. The unit has worked fine previously but has stopped all of a sudden.

... Fujitsu Air Conditioners

Chigo kfr-51gw/gx1a 1800btu split unit, when it is in cool mode the compressor runs for ten min , shuts down for 3 min repeatedly while the inside head unit fan still operates. I have read that this unit has a de humidlifier mode that has simular response, is there any way I can bypass this dehumidifier mode? or is that normail operation for this unit? Thank-you

Do you have a dehumidifier? ... Air Conditioners

Fujitsu AST30LBAJ Indoor Unit & AOT30LMADL Outdoor unit . Outdoor unit not operating . Indoor unit fan is operational.rnThe Operation (Red ) Lamp flashes 5 times then stops for about secs then starts again, while the timer (green ) lamp flashs continuously.

... Fujitsu Air Conditioners

I have a Rheem (Criterion) unit and i'am having promblems with the main burner staying on. When i turn the unit on everything operates like it should up to the main burner staying on.Once the main flame kicks in it will stay on for five second and the flame will go out along with the draft moter( for about three second the trouble shooting light will flash four times) then the unit will start cycling all over again from draft moter purging, glow plug will operate like it suppose to up to the mai

Run a wire from the sensor down to the control board conector. Bypass the sensor wire around the connector in the blower deck.\015\012The connection can be wire nutted on the sensor lead with the wire (16 or 18 guage stranded wire works) route ... Air Conditioners

When unit is turned on the operation and indicator light are solid for about a minute then the indicator light goes off and the operation light flashes. The outdoor part of the unit does not seem to be switching on ( no noise or fan). Outside unit has power. Filters are clean.

It's communication error between indoor and out door unit.Comms Error, check your wiring, remove external pumps. Split/Multi - check volts from terminal N to 3 = 0 - 65 Vdc, Multi V - 4 Vdc terminals 3 and 4 ... Mitsubishi Air Conditioners

Describe your carrier 42kgl - 018p operating Problem, Remote not operating, battery changed, it shows frequency transmiting signal on remote but does no effect on Unit, how ever unit works fine with mannual button.may be remote is working but it is not senced by unit.

... Carrier Air Conditioners

My MSY-A17NA UNIT will start functioning normally then after about five minutes it stops blowing air and the operation led signal starts flashing. When both the operation and indicator led's are on the unit works properly. After I shut it down and start it up again the unit works fine. How can I get it to stop shutting down every 5 minutes? I'm in Hawaii and it is Hot here! Please help.

Hi,Here is a tip about Mitsubishi Air Conditioners and how to get the manuals for all of the Mitsubishi line. The manual include both troubleshooting and installation. ... Mitsubishi Air Conditioners

Have a Multi Split Indoor unit ASU9RD - 2 units and Outdoor unit AOU18RD. Operation blinking GREEN; Timer blinking RED. Remotes not responding, Turn off units at circuit breaker, units still blinking the same. Both indoor units went down at same time. Had unit serviced in June 2010. What are the blinking lights telling us (Code)?

Hi.Here error codes:ERROR CONTENTS ... Fujitsu 12C1 Air Conditioner

Friedrich EM18J34B - Unit will only operate in fan only mode. When turned to Cool or Heat modes nothing happens. Position of thermostat has no influence - the unit will not operate. Ideas?

... Friedrich Air Conditioners

Ductless split system, single zone, gives trouble display. Operation light flashes 6 times rapidly, then both Operation and Timer lights flash 5 times at 1 second intervals, then the timer flashes 1 time at 1 second interval. What do we do? The unit doesn't put out heat. I only feel air when I click the Coil Dry Button, but the Trouble Display continues. Unit will not shut down. I flipped the main switch, connected to the heat pump, on the exterior of the house, but it started back u

What make and model is it? ... Air Conditioners

I need to find out what I need to operate my unit properly before use. I bought an Amana 9000BTU, MODEL AP095R. It has auto evaporation function. The unit looks fairly new, does not have booklet. Do I need Exhaust, or drain hose to operate?

... Amana Portable Air Conditioner

I have a S24ahp3 room air conditioner,in Auto changeover operation and also on Heating operation the unit will reach the temperature required and then switch off completely.the only way it will start again when the room cools is if i Manually start the unit each time it stops.

... LG Air Conditioners

Compressor comes on, works for two minutes then the compressor shuts off whilke the fan continues. I recycle power on the unit and it continues top operate in this manner. I have left it off for a few days to make saure it was not a iced up unit or overheating but it still operates the same.

Your compressor has a safety built into it called a thermal protector. If you were to feel the compressor after one of these short cycles it would be extremely hot. Your compressor is malfunctioning, and it could be several things. I will list them i ... Amcor Portable Air Conditioner NANOMAXA12000E

I have a Thru-Wall Carrier 18000 btu Air Conditioning Unit Model KCA 183 P. This was installed in our mobile home in August 2007 but never used as there was only 30 amp service. The previous owner has either lost or missplaced the Operator's Manual, and as we have just now upgraded to 60 amp service, would like to use this unit. We can get it to run, but as it is digital we aren't sure what the icons represent, and how we should set it. We would love to be able to get the Operator's Manual

... Carrier Air Conditioners

My Ruud silhouette II some times will not operate. I the room temperature is below the thermostat setpoint and the status indicator on it says ''System On.'' I The unit and the green ''OK'' LED is flashing 4 times, then pausing repeatedly. After some time, the unit will function properly (I have not checked the LEDs while it is operating properly). It will work fine for weeks and then the problem reappears. Any ideas?

4 Blinks is an error code of a sticking pressure switch. A pressure switch is a safety, which in this case is being used to verify that your furnace is drafting properly. Yours in particular is sticking in the closed position even after the call for ... Ruud UAKA037 Air Conditioner

The air con unit was not pumping out cold air, so a repair person came and added more gas but then told me the temperature sensor was not operating. However he could not apparently locate a part in Canberra Australia. At the moment I have to push the emergency button to get the unit to operate. Do you know where I can get these parts ? Regards Robert Pearce (Canberra ACT mobile 0414 514 948 ) Email [email protected]

Hi Robert Pearc,\015\012\015\012   As i do not have the exact model number/Part number, i would not be able to offer you exact webpage where you can order.However, o\\\015\012\015\012 Look at the back of the part. There wou ... Mitsubishi Air Conditioners

My Mitsubishi Mr. Slim heat pump (indoor unit MSZ-A09NA / A-15NA / A12NA / A17NA, according to the operating manual; outdoor unit MXZ-3A30NA) is not providing heat. The left green indicator light blinks when I try to restart it (Breaker, emergency heat operation), so I've turned it off). The problem began when I was clearing the condenser of 3 feet of snow and ice. The fan inside the condenser can move freely. When I sent this question earlier, the wrong model number was in the headline. If heat

Here is the service manual for the model # you gave. http://www.mehvac.com/UploadedFiles/Resource/MSZ-FD09~12NA_S ... Air Conditioners

I have a problem with split-type ac unit, when the unit stops due to cooling, the unit doesnt turn on to cool operate again. I have to set the control to start the unit again. Someone recommends me to change the capacitor of the outdoor control unit. Or maybe I have to replace the a/c unit?

First of all I would change out the thermostat since you say you have to turn the unit on at each use. The capacitors only assist in the start of the compressor and fan. You main issue seems to be the activation after the unit has been off. I thin ... Carrier BCA101R Air Conditioner

FUJITSU Air Conditioner Model AST24RGB-W is unable to switch on. Have checked safety switch and fuse on home circuit board and is OK. Power conected to outside unit is on and OK. Remote control has new batteries and display OK. Cleaned remote sensor panels on both remote and wall unit. ISSUE: When pressing the Start/Stop button the signal doesn't seem to be received by the wall unit. There is also no operation light on the Wall Unit. Unit does not turn on

What about the inside unit does it have power going to it. i would check the breaker for the inside unit. ... Air Conditioners

Unable to switch on. Have checked safety switch and fuse on home circuit board - OK Power on outside unit on and OK Remote control has new batteries and display OK Cleaned remote sensor panels on both remote and wall unit ISSUE: When pressing the Start/Stop button the signal doesn't seem to be received by the wall unit. There is also no operation light on the Wall Unit. Unit does not turn on

As per the problem which you mentioned it clearly indicates that problem is with the switch in the wall unit.but you mentioned that you checked the switch and it is OK.\015\012this means that the problem is with the main circuit control board o ... Air Conditioners

Outside unit not operating. Outdoor Unit fan (fan

The fan motor is burt. replace it. it will still spin if you manually engage but it will overheat an may even cause fire, also that waste tremendous amount of electricity now.cap is not defective, ... Air Conditioners

I found the Bryant furnace 395cav048090 calling for heat but not operational. I shut off power to the unit and switched power back on and the unit started its ignition sequence. With power on the blower starts as a result of thermostat calling for heat from the unit and after a minute goes on to second phase of ignition with exhaust blower motor initiated. During this phase gas is being brought to the burner that you can smell however burner does not ignite gas. Unit continued with this opera

If you do not see a bright light before the gas releases, your ignitor is probably out. If you disconnect, you should measure ohms from the two ignitor leads. If you do not measure any, it is open and will not work. You will usually see a mark of whi ... Bryant Air Conditioners

Indoor Sanyo ductless split Model # KHS 2432 serial # 0012832, Works fan on and off functions and speeds. As soon as you set the remote to heating or cooling the unit beeps 5 times quickly and then the unit no longer responds to remote control. The blower will then run for 1 minute and then the the unit no longer will work. Power must be reset for blower operations to function again. Out door unit, has enough charge, Ambient temp 39 M#CH2432 S#0012424

... Sanyo Air Conditioners

Hi ...we have a split fujitsu air con for just over 5 years. The compressor in the outdoor unit is not starting up and the indoor unit blows ambient air. The operation light is lit and the timer light is continuously flashing when in use. Have reset the breaker and the units and also the remote to no avail. Can't find any info on the net or in the manual. Any tech help most appreciated. (Also doesn't seem to be a auto/manual reset buttn as such in the indoor unit)

There is a relay that the thermostat pulls in, in the unit outside. When this happens, the compressor pulls in and the unit outside will run. The compressor has to run before the unit will cool. ... Fujitsu 24C1 Air Conditioner

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || www.ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.0572 seconds