Having problems with your Air Conditioners ?

Stopped pumpin heat displays E7

\015 The digital display says E7 and won't turn on. the run light flashes and beebs four times when I try\015

Answers :

Follow the link below to find the information about your unit. Also, if you can't find the information that you need then they will have a way to get you the tech support that is brand specific.
\015\012http://www.edgestar.com/support/portableac.htm

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Stopped pumpin heat displays E7


Follow the link below to find the information about your unit. Also, if you can't find the information that you need then they will have a way to get you the tech support that is brand specific. \015\012 ... EdgeStar AP410HS Portable Air Conditioner

Have NEC RIH-2667 Inverter Split system.I set to Heating mode,set temp to 25 degrees.The compressor light comes on.The run light flashes for about 30 seconds.Then the vent opens,the fan comes on and starts blowing out heat.Within 5-10 mins the temp on split displays starts going up.when it gets to 26-27 the run light flashs,fan stops,no heat coming out.The temp on system keeps going up to 30 degrees.it takes approx 40-60 mins to come down to 25ish the will come on again and repeat.I have an inde


... Air Conditioners

Hi, I have a LG NEO PLASMA S18AHN SPLIT UNIT, It was already installed in our house upon us purchasing it, it would be approx 3 years old, has been pretty much running 24/7 and has been great up until recent, about 6months ago it stop and displayed the C6 error code, at this time I replace the external units motor start capacitor, it ran perfertly again for the next 4months, until it stopped again and again after reseting. When trying to run on Heat it comes straight up with "Defrost Mode" it


My lg 18 000 btu split neo plasma is on heating in any mode u put it\015\012what do u think is the problem ... LG Air Conditioners

The DeLonghi PACA130HPE 13000 BTU Portable Air Conditioner unit will not function. Unit displays the Alert symbol only and no other designation as identified in the product manual. The unit was in heat mode when it stopped working. We have unplugged the unit for at least 30 min and tried again with the same result. Suggestions?


I had the same problem, you have to empty the water pan in the rear of the unit. In the heat mode it will NOT evaporate the water like in the air conditioner mode. If you use it a lot in the heat mode and have a lot of moisture in the house you wil ... DeLonghi PACA130HPE 13000 BTU Portable Air Conditioner

On using the machine as a heating unit during the winter months and during cold spells, the machine would work for a short period and then stop with the display showing and 'error code' E4


Check the drain pump, is it getting blocked or is it loose.If the water gets blocked from draining, then error e4 comes up.The other possibility of error e4 is short in control board components.First check the drain line, if its checked ok then the c ... Air Conditioners

I have a drayton tempus one control panel and it has stopped working - nothing on the display screen as if there is no power to it. So we have no heating or hot water. Can you advise what could be the problem and how I could remedy it. I have misplaced the instruction manual. thank you


... Dayton Air Conditioners

VOKERA MYNUTE 28E NOT PUMPING HEATING WATER THIS MORNING DIGITAL DISPLAY SHOWING 94[NEVER THIS HIGH]THE VALVE OPENS THE BOILER FIRES UP THEN STOPS THEN NOTHING


... Air Conditioners

My valiant boiler ecoTEC plus begins to come on, but then display code S. 7 comes on and it stops heating up? Do you know what I can do to fix this?


Read what code s.7 means ... Air Conditioners

New installed W.Bosch Greenstar 30CDi with DT20RF programmer. Have been getting intermittent cut out of heating when in progress as indicated on the programmer display by flashing green heating led and flashing CH & RF receiving icon on lcd disply. The heating ceases and resumes eventually on its own accord.The thermostat is still requiring heating according to its display. The thermostat batteries are fine ,there is no error messages on thermostat. Any ideas?


One of my customers had the same fault recently. We tryed to reset the radio connection but, the appliance still did not respond. \015\012The receiver was disconnected for the evening to prove boiler and system functionality which was ok. ... Air Conditioners

RTH7400 thermostat installed-screen display unlit-used page 10 wire installation. Used heat pump wiring-which does not show W2 and Y2 on heat pump schematic, so used conventional displayed W2 and Y2 connections. Have heat pump w/elec. furnace backup. Suggestions??


W2 and y2 are used for 2stage applicationsw2 = 2 stage heaty2= 2 stage coolIf your system is a single stage system, look for the y1 and y2 terminals. If the thermostat does not have y1 and y2 then you may have the wrong ... Air Conditioners

I have a carrier heat pump that will run for about 5 minutes before tripping a breaker and then displaying an E2 code on the thermostat. It will run fine on auxillary heat but not in heat or cool mode without tripping breaker and displaying E2 code.


Sounds like something is going on with the compressor or the outdoor unit. Call a service company ... Carrier TSTATHCP Programmable Thermostat Air Conditioner

Honeywell thermostat T8400c started flashing, heat/cool was off. Display flashes all icons (heat and cooling icons, temperatures, everything) and on the oppposite flash, the setpoint is displayed. The fan comes on when turned to ''ON'' but heat or cool does not when in ''auto''. The compressor can be turned on outside at the switch, but appears to have no freon. Heating & cooling worked within 2 weeks prior to this issue. Any help would be greatly appreciated.


Based on the simplicity of this particular t-stat, I really think that it is bad and needs to be replaced. They do not make this particular model anymore. I have included a link to the operators manual for the stat. Good luck!\015\012\ ... Air Conditioners

Heil heat pump makes a knocking noise (see video) switched Hunter programmable thermostat from auto (heat or AC as needed) to heat. Knocking stopped but unit runs aprox 10 mins stops running for around 5 seconds and then starts right back up for another 10 or so minutes and continues this cycle.


... Air Conditioners

Amana heat pump emergency heat comes on but blower will not start. The call for heat comes in and the heating element(s) glow red for a few seconds and then there is a "click" and the heating strips de-energize. The blower fan motor doesn't come on, however the squirrel cage fan spins freely. The heat pump stopped working several years ago, but I just used the emergency heat option for heating solution. The squirrel cage fan motor was replaced about 3-4 years ago.


... Air Conditioners

I have an ES displayed on my delonghi aircon unit with the power icon flashing - What does this mean? It happens only on heating and it will heat for a couple of minutes then display ES.


... Air Conditioners

3 new Coleman 47073-879 ac units don't shutoff cleanly. 2 have heat pumps and they change fan speed quickly when starting and stopping. I've never had heat pumps before but find this start and stop sequence annoying. This is a brand new coach so I expect any needed service would be covered by warranty.


... Coleman 13.5 Btu Rv Air Conditioner

12 year old Amana Heat pump stopped cooling and heating. The compressor was replaced, the fan motor, etc. AT first it would run for 15 minutes and stopped. The repair person returned twice and the thi


... Air Conditioners

I have a Nordyne Intertherm split system Model MMHA-056ABHR-01. The blower starts and stops or oscilates when trying to heat. The burner ignites fine and the fan will run fine when put on continuous. But when the thermostat is set to auto and calls for heat the blower starts then stops.


... Intertherm Air Conditioners

I have 2 kickboard heaters in the baseboards under the cupboards in the kitchen (Smith SS7's). They are run off the hot water central heating circuit. The fan in each unit is supposed to click on to blow hot air from the heat exchanger when the temperature falls. Both units have stopped working - when one stopped the other worked intermittently for a few weeks but now this does not come on either. I have bled both units and if I keep doing this then eventually hot water reaches both but the flo


Does your heating system have zone control valves? if so make sure they are opening with kitchen t-stat. sounds like the boiler pump is not able to flow water to the units. might be a zone control problem. ... Air Conditioners

Over the summer we shut our thermostats off so that our furnace would not turn on since the weather was beautiful. But we noticed that our heaters in our downstairs part of our house were warm. The furnace did not sound like it was on, but for some reason, the heaters were emitting heat. In order to stop this, we had to manually shut off the valves on the furnace. This stopped the heat from coming out of the heaters. But now that it is fall, I have the thermostats on and even when the tempera


Do you have a water heating system? ... Air Conditioners

Ductless split system, single zone, gives trouble display. Operation light flashes 6 times rapidly, then both Operation and Timer lights flash 5 times at 1 second intervals, then the timer flashes 1 time at 1 second interval. What do we do? The unit doesn't put out heat. I only feel air when I click the Coil Dry Button, but the Trouble Display continues. Unit will not shut down. I flipped the main switch, connected to the heat pump, on the exterior of the house, but it started back u


What make and model is it? ... Air Conditioners

Goodman 3 ton heat pump - condenser fan motor gets hot and stops running. Have tried 3 motors. Heat of the day it stops.


Did you get a motor with the same amps? did you check to what the amp draw is on the old motor to the new? reason is different amp ratings on motors need dfferent blade pitches, also 2,3 or 4 blades pull different cfm. is the motor a ... Goodman CKL60AR60 Air Conditioner

I have a vitodens 100-w combi boiler and tried to turn the heating on just to give it a working as was advised. However, I have no heat coming to my radiators. The boilers seems to be working as my hot water is fine and no fault displays are being displayed. Have turned it off at the mains and restarted it, but has done no good. Any ideas?


Here's the deal: If your Vitodens 100 has outdoor temperature sensing capability, either built in or via external aftermarket control such as Tekmar or other, and the temperature outside is above warm weather shut down (WWSD), then the boiler will no ... Air Conditioners

I have an older (1992) Trane Gas/Electric heating and cooling system Model # YCC036F1MOAA. I have been having problems with the unit not allowing the burners to stay lit. The thermostat calls for heat, the combustion fan comes up to speed, the gas is released and the electronic igniter is energized and the burners are lit. Too often the gas is stopped and the burners stop immediately. The system goes through this cycle two more times as expected with the same result and finally the combustion fa


Hi Mke,\015\012The flame sensor system works by passing a small amount of electrical current through the flame from the flame sensor and then back to the ignition control through the ground wire...\015\012the gornd wire is the green wire ... Air Conditioners

HEAT PUMP I have an older Twin Temp heat pump. Last night it was working fine then it started making a buzzing noise it was still putting out heat but the noise would not stop. I'm guess it switched from heat pump mode to eletric heat? Is this normal for the loud buzz though? It did smoke up and smell burnt a little bit. I just thought what ever dust dirt was burning off the heating elements. Should I be worried?


It is not normal to have a loud buzz associated with the electric heat. Try turning the heat off and running the fan only to see if the buzz continues. The buzz could be coming from any number of sources including an electrical component, the blower ... Friedrich Air Conditioners

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || www.ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.0563 seconds