Having problems with your Air Conditioners ?

27 year old Lennox gas furnace no heat was coming out of the vents, so I went to the basement and saw 1. One burner was clogged all along the surface and instead of the flames going up the flue, they were going to the outside of the flue where the wires are. 2. I was told by an HVAC that the flue is stopped up with soot and to just go ahead and get a new furnace. Should we get a new furnace or get this cleaned out? Thanks

Answers :

Please get a furnace that thing is seriously a death waiting to happeng.that is a scary thing to happen. I personally have seen the end results. In the mean time space heaters are safer.

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

27 year old Lennox gas furnace no heat was coming out of the vents, so I went to the basement and saw 1. One burner was clogged all along the surface and instead of the flames going up the flue, they were going to the outside of the flue where the wires are. 2. I was told by an HVAC that the flue is stopped up with soot and to just go ahead and get a new furnace. Should we get a new furnace or get this cleaned out? Thanks

Please get a furnace that thing is seriously a death waiting to happeng.that is a scary thing to happen. I personally have seen the end results. In the mean time space heaters are safer. ... Carrier XHB123D X/Y Series Heat/Cool Air Conditioner

Replacing the thermostat, took the old one off without marking the wires. Hooked it up by color and we get the furnace when we put it on cool. wires are green, red, yellow & blue (ground wire)on the wall. The new thermostat wires are red, yellow & green. Can you tell me which wires go where correctly?

The normal wiring for stats is white=w=heat,red=r=24volts,green=g=fan,blue=c=common,yellow=y=cooling.\015\012see what ties into your furnace board and match the terminals. ... Honeywell Air Conditioners

I have two heatpumps up and downstairs and two furnaces (piigy back). At times my pump outside freezes up and cold air blows in the house. I was told that I needed a kit to tell my furnace to turn on when it gets to cold for the heat pump. It will cost 400. This is the third time they came out. 1-nothing wrong. 2-New thermostat 3-Need kit. Is this something I can do? Amana Heat Pump RHA36B2A

Hi,\015\012A couple of things... First your furnace should be 2nd stage on a 2 stage thermostat and if the heat pump don't keep up your furnace should be coming on anyway...If you get a Honeywell Vision Pro 8000 series thermostat for 2 stage he ... Air Conditioners

How to change 3 wire motor with 4 wire motor for outside ac unit fan motor?....old motor had blk wire going to a circuit board, also pur wire going to c terminal on cap, also brw wire going to f terminal on cap...... new motor , on the name plate , shows blk and wht wire going to line. also brw and brw/white stripe wires going to cap.... does the blk go to the same place as the old blk and the white does it go to the other line wire coming off the contactor? also which terminals do i attach t

You need this wire onto the "F"terminal- fan terminal as this is a 230 volt condenser fan motor all your doing is parrelling the cap ... Air Conditioners

Condenser outside Aight,,, so i finally got power to it outstide,, now, to get it to work i had to bypass some wires,,,, from thermostat to furnace and then to outside we wind up with red and white wires.... both hace power,,, now,,, the white connects to and follows a blue wire.... blue wire goes down and inside this white tube lookin thing... this thing is attatched to copper pipe,,, another or possibly same wire comes out,,, thats where the power stops and fail to turn the motor on,,, what is

You could br=e low on r-22. sounds like the thing is a pressure switch ... Ruud UBHC Air Conditioner

I just got a new honeywell thermostat and it when i first hooked it up it wouldnt turn on so i check to find out which connections on the thermostat when open i changed my wire to make it correct now when it turns on it doesnt turn off. i only have 2 wire that were on the old thermostat and the new one shows spots for 3 wire do i need to run a 3rd wire to get the furnace to shut off after it reaches desired temp? right now i have to disconnect the thermostatto shut it off.?

Hello my name is Heath it will be my pleasure to assit you. If you did not turn the power off to the furnace before rerplacing the thermostat then you may have burned out the board in the furnace. But first if there is a RH/Rc terminal in the new the ... Honeywell Air Conditioners

Installing thermastat took off amana thermastat and put on honeywell model rth3100c non programable, digital thermastat. but i did not lable wire when i disconnected wires. i put new honeywell on but can only get emergency heat. when i switch to air or heat i keep popping the 3 amp fuse in the relay circit which i just put on new cause i thought that was the problem till i found out my thermastat was bad.i was told by honeywell that it seems like i crossed a wire somewhere. but i need to know wh

Any wire can go to any terminal. unfortunately you now have to hand trace each onre to the device it powers and hook it up accordingly. a daunting task even for a pro. having said that the installer could have used the normal colrs for the usual wir ... Honeywell Air Conditioners

I have a carrier 38YKC036300 heat pump with an electric furnace. I am attempting to install a new bryant T6-PRH thermostat http://www.catalog.bryant.com/wcs/proddesc_display/0,,CLI1_DIV42_ETI4641_PRD1583_SIT70,00.html. The wires dont exactly match up with my old existing thermostat. My existing thermostat has the following connections: W2, C, R, G, E, O, and Y. My new thermostat has Rc, Rh, W/W1, G, Y/Y2, C, O/W2/B, Y1. Please tell me which wires go with which terminals on the new thermostat. P

Old Tstat New Tstat\015\012R Jumper Rc & Rh\015\012E W/W1\015\012G G\015\012Y Y/Y2\015\012C ... Carrier 38CKC036 Air Conditioner

Have atwood 7916II furnace and wish to wire in new thermostat. Existing wires on furnace are, white - black - red. Which wire goes to power and which go to thermostat. Thank You, Walter

... Coleman Mach III Air Conditioner

I bought a forclosesure this summer and not all that familar with the furnace in the guest house. I'm use to having a furnace with a pilot light(yes, it was 34 years old)now I,m trying to get a goodman furnace going. I know it was sitting around for atleast 2 years. The home inspector said everything works.The model number is gmnt040-03. The gas is turn on the outside line. When I start it she begins to hum and then the ignition light goes on. then a blowing noise but then I get no flames-after

Hi,A few things to check...Is the gas line valve on at the unit....follow the gas line back a bit sometimes the gas valve can be out of view.Also check the gas valve in the furnace... it may also be in the "off" position.... ... Air Conditioners

I have a Trane Heater/AC unit no heat pump with a thermostat model 802AS32DAA that has seven wires. I am going to a five wire heating/cooling thermostat. What do i do with the two extra wires? old thermostat red wire-RC slot (24 V from A/C) white wire-W1 (???) yellow wire-Y (A/C Compressor) green wire-G (A/C Fan) black wire-B (?????) Blue wire-Y2 (????) orange wire-W2 (24 V to Furnace new thermostat therminals G Rc Rh Y/O W/B Y1 Can you tell me what wires to connect to each

From Honeywell : "If your old thermostat had Six or more wires, the replacement you have is Wrong!" ... Air Conditioners

I've replaced my very old (mercury) Honeywell thermostat with a new one (round, Model: YCT87K1011), but I can't get it to control the temperature. If I connect the two wires one way, the furnace comes on but won't shut off. If I reverse the wires, the furnace doesn't come on at all. I've actually tried two of these replacement thermostats with the same results. Any suggestions? John

Hey John, man that ole T87 has been around for a hundred years and I have installed many of them, but I cant remember the letters on the wiring. Seems to me that it is R-W-Y, any way you will use the R and W. I have a t87 at home still in the box an ... Honeywell Air Conditioners

My WeatherKing A/C heat pump is 5 years old and friday I was told it shorted out and burnt my compressor. Because of government specks today, I was told that I would have to replace the outside unit and the inside unit also because a new unit was not compatible with the furnace inside. My home is 2300 sq. ft. What is my best buy for new equipment, and what kind, Lennox, Rheme, or Trane, or am I being conned?

Yes!! You are being conned.... that compressor can be changed without changing the whole outdoor unit or anything else....\015\012\015\012Get another company to look at it and find one that will just change out your compressor... then the ... Air Conditioners

Ruud UPNE- 036JBZ 2 years old (outside unit) Ruud Acheiver air handler 1 year old inside unit... outside unit will not come on. voltage (120) ready at contacts. push manually and it comes on. yellow wire and brown wire go to board. no power on these when inside unit is running. power bill has doubled......must be running off heater coils? What would be the next thing to check. I did look at thermostat seems to be working normal. Can't get knowledgeable help.

... Air Conditioners

I have an Amana a/c unit and the compressor outside keeps stopping however the fan goes on. The a/c service guys have been to my house 3 times and the wires each time were burnt. The last time they change the capacitor and and new heavier guage wires and it lasted for about a month. When trying to turn iton now I am back to the same situation. Do you think I should I go for a compressor or change the unit ? It is a 4 ton model BBC60a2A and the outside unit model number is RCE42A2A . Thanks

... Amana PTH123B35AJ Air Conditioner

Hello, my HVAC is constantly freezing, even after freon is added. I was told that I have a leak in the coils and need to chance the air handler - the outside unit is about 10 years old - air handler about 18 years old. I would like to get only the air handler for my R22 outside condensing unit. My question is if in the future can I use this same 3.5 ton air handler with a new 410 condensing unit once my outside unit needs to be replaced. In other words can a Goodman air handler be used firs

I'm new at this and I can't tell how old the post is but I'll contribute anyway.You probably have fixed the problem by now. I wonder what part of the system is freezing up. I don't have a lot of experience but I know you can get frost where there ... Goodman CKL42AR42 Air Conditioner

New Hampton Bay Model 640-657 Classic Collection Burgess 54" Celing Fan with Remote. I have had installed by electrician ,also re checked by different electrician. Both have charged me and told me it is wired correctly. Comes on some time by itsself and then light will not go out. I have replaced the battery 3 times with no help. I have wired into a wall switch . prior to the Fan. Could use some help. Is there a kit I can wire without the Remote. Fan is less than 3 weeks old. Getty costly to k

... Air Conditioners

Have six year old Bryant electric furnace with heat pump, no gas. Old blower motor was going out and replaced with another generic blower motor. Wired the new just like the old and changed capacitor. There are some differences between old and new. Old says "Volts 208-230" and new says "Volts 115." Problem is blower turns on and of, over and over again. Help?!?

Hi,\015\012You totally have the wrong motor....you need to get a 208-230 motoro on there for it to work... in fact you probably already have ruined the 115volt motor...the voltage for that motor is to be 115v and you are probably running 130 vo ... Air Conditioners

Where can I find a wiring digram for the transformer it has 4 wires going into it on the hot side then to comming out on the 24 volt side.I took the old one out to replace it and cannot seam to get the wires hooked back the way they were.The unit works by pushing on the points but not from the thermostatIt is also brand new model no is PCK036-1 we only use the air side not the heat.

It sounds as if you have a multi-tap transformer. That is, the primay voltage can be 120, 208/240, 480. Most all transformers have their legends printed righ on them. Usually the 4 wires are a common and the other wires to the incoming voltage by i ... Air Conditioners

Furnace gas pilot light keeps going out when windy outside

Honeywell makes an electronic ignition conversion kit. (White rodgers also has one but it uses a mercury switch which can be expense if it goes bad). A good service man can install the "Honeywell Y86 Universal Intermittent Pilot Retrofit Kit". This ... Air Conditioners

Help! I have a Kelvinator 2 KSR25F split system a/c that is not working. Every time I turned it on it trips the safety switch. I had a guy come out and look at it and he told me that the compressor is gone and that I need a new a/c as it would not be worth fixing. The unit is at least 8 years old and I have never had a problem with it apart from the capacitor going last year. My question is this, is it worth/cheaper getting the compressor fixed or buying a new one (money's too tight to mention

The compressor is the last resort. there could be another problem causing the system to trip circuit. sounds like a wire grounding inside the condensing unit control panel located at the contacts. check there first and inspect the other wires inside ... Electrolux Air Conditioners

I have a Goodman Air Conditioner Model CK49-1B. The fan in the unit does not turn on when the thermostate is set for cooling; the fan in the furnace works and blows warm air. Checking outside I discover that the dog chewed three wires that are coming from the unit. The repair person told me that the dog shortout the CONTACTOR and had to be replaced it, he also replaced 12 inches of wires damaged by the dog.. He did the job in less than one hour and charged me $225.00. Did he over charge me? Late

Take a look on amazon for same parts, and compare the prices: Amazon com goodman air conditioner parts. I hope this was helpful. Cheers ... Goodman CLQ36AR49 Air Conditioner

We have a new Rheem heater/air conditioner...we turned on the AC last night and just noticed today that a lot of water is leaking from some pipe that the installers left cut - which is directly on top of the furnace...is this going to cause any problems? water is very close to the wiring of the furnace and it's a lot of water! we called the installer and says he will try to come out tomorrow...but shouldn't we have someone look at it today? who can i call??

If the water is leaking too close to the electric wires ..you just take a tube of some kind and for te moment just guide the water to drain away from the electric stuff...and by the way ..this is the condense water that results on the difference of t ... Air Conditioners

Got a rayburn 355sfw stove dealer says 6 inch flue going to 7 inch after offset but rayburn paperwork says 7 inch going to 8 inch after offset would it make much diffrance its brand new and want to get it right cheers

You need to go by paper work it their to work at its maximum they would say6/7 if thats what it needed the manufacture has tested this product and this is the result of their test ... Air Conditioners

For ruud achiever 10 ac unit uaka-030jaz. Unit was working fine saturday...sunday we noticed air was not cold anymore. I have checked all my breakers, put a new battery in the thermostat, cleaned the filter on the furnace unit, and opened the exterior unit to see it the relay was burned( appears ok as long i understand which part is the relay.). When we turn on the ac the furnace unit in the attic will come on and blow air..however it never gets cold and nothing in the outside unit appears to co

Hi, the problem is in the outdoor unit if the indoor unit comes on and is blowing air. At the unit, you will have a disconnect box, 220 volts. Inside there will be 2- fuses. If you can't see them its because they are behind the plastic cover. You may ... Air Conditioners

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || www.ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.1321 seconds