Having problems with your Air Conditioners ?

Panasonic AC Model CS-A28BKP5 remote not working.

\015 Remote does not work....Replaced with a new remote however still no joy. Checked remote and is functioning correctly ....unit can be turned on and off manually...does this mean the sensor on the wall unit needs replacing?\015

Answers :

Order new remote

Repair Help & Product Troubleshooting for Air Conditioners
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Panasonic AC Model CS-A28BKP5 remote not working.

Order new remote\015\012 ... Air Conditioners

Panasonic Inverter CS-E12EKU timer indicator blink. The unit not work at all, I follow the manual instructions using the remote control but the instructions are not clear. Using other similar Panasonic model instruction clarify the process and get 4 seconds beep, 30 seconds power indicator on and the code F99 at the control. In the error code table for the similar model F99 means Outdoor Direct Current (DC) peak detection and instruct to verify the- Outdoor unit PCB- IPM (Power transistor) - Cop

Today I install a new unit Panasonic CS-S13KKP also have a same problem timer blink and the outdoor unit wont start. Error code is 11. after checking the problem, can not using a 3 cable cord, solve the problem using 4 Cable cord and its run ! ... Panasonic Air Conditioners

Panasonic Invertor I have two units they work fine, but the remote for one has gone blank. I have the screen go blank on occassions on the second remote but i give it a tap and the screen comes back up. The Model number for the indoor unit is CS-E18HKR and the outside CU-E18HKR. I'm assuming they require batteries but there doesn't appear to be anyway to do so. Please help.

... Panasonic Air Conditioners

We have a lot of Fujitsu a/cs at work and the remote controls get swapped around. One remote doesnt work with an a/c. The same model remote from another room will work so it is not the a/c unit. Are the remote controls paired with the a/c unit? Do I have to do something to pair it to this a/c? Pressing the reset button on the remote control doesnt fix the problem. The model number is AR-RY3

... Air Conditioners


... Air Conditioners

I have panasonic 1.5 window AC model no. CW-XC-184BY. When the problem started, the cooling started only after about 20 minutes delay and cooling was good. Now the cooling starts and stops within 1 or 2 minutes. The remote is working. What is the solution

Check the coolant. It must be depleted. Requires a refill. ... GE Zoneline AZ55H15D Air Conditioner

Air conditioner Panasonic Modell CS-A24BKP can not be controlled by remote control. Obviously the receiver is faulty. I run it now on Automatic setting (reset on factory setting by myself), which works with the main button on the Air con. Now my question is, because I am not able to change temperature or mode cooling/heating: Is it possible to heat on automatic too?

... Air Conditioners

Remote does not turn on Panasonic CS-A28BKP5

... Panasonic Air Conditioners

I purchased a commercial cool room air conditioner by Haier (7000 BTU) and I set it up and turned it on and used the remote and everything worked accordingly. I came back in the room to adjust the settings and the remote would not work. I changed the batteries (though they were just out of the package 3 hours ago) and was able to adjust one setting and the remote would no longer work. Unfortunately with this model, all settings except the on/off switch are on the remote. Please help!

I am assuming that this is the same thread that I just answered only with a different title. ... Air Conditioners

The remote control does not work at all. The air conditioning works manually. The model is a 15 year old split unit/heat pump MOD: AG1BH17AW. we would appreciate your help, since we live in Spain, and there are no remote controls for this unit in the country. Can we get a Universal Remote control, or is the unit too old for that too...Although it works fantastically! Thank You!

... GE AJCQ08ACB Air Conditioner

What do all the buttons on the remote mean/do? i have no instruction book etc. can anyone help with even a manual from another model or the same model... I know it has functions like timer delay etc. but I don't know how to program it... Right now the AC's compressor is not getting switched on... only the fan works.. Model number is RAV014EKD the remote has KAIMIN fn. , and a few others to.... Please Help!! thanks

... Hitachi RAS-09UH Air Conditioner

I have a Hyundai Air Condition, Model NO: WSH188BA. I have lost the remote for it. WHere can i purchase a remote for the above model, or is there any other remote that will work with the AC. In need of one urgently.

... Hyundai Air Conditioners

I have an old Kelvinator air conditioning. Not sure what the model is since I have lost the manual, but from the remote control I can see some code looking like the model number: 6711A20012M. A few weeks ago the remote control died while the air con was on. I thought this was because of the battery, so, I went on to replace the battery, and tried to turn off the air con, buttttt....it didn't work, the air con was still on no matter how many times I pressed on/off to turn it off using the remote

You're right! It's receiving sensor problem with your PCB. Only repairman who knows electronic tech could only repair. I could say the cost of repair in Indian Rupees IRS.850/- maximum. Hope it's helpful? ... Air Conditioners

We have a Kenmore airconditioner about 10 years old 15,100 btu, 27" wide, 10.7 effic. The on/off sensor on control panel got pushed all the way in and broke. Airco does not go on now. We tried a universal remote - it did not work. Our original remote never worked either. Do you think getting hold of a new "original" remote will solve the problem, or is the airco broke and needs other kind of service? We have a manual but don't know the model # right now. Thanks much.

No remote will work without a sensor. The sensor will need to be replaced. ... Kenmore Air Conditioners

Hi, My remote won't work for my air conditioner. Batteries changed. Can't tell if it's just remote or air conditioner unit as well that aren't functioning. Can you tell me if there is a manual way of operating the airconditioner without the remote? If it is the air conditioner, what do I try to get it to work? I have taken filters out and cleaned them and that's all the ideas I had. My air conditioner is a LG Model LST 244H-2 split system. At least 6 years old. thanks for your help

Here is the main ONLINE SUPPORT page for your LG model LST 244H-2: ... LG Air Conditioners

We have a Kenmore window airconditioner about 10 yrs old. 15,100 btu, 27inches wide, 10.7 effic. rate. Cannot access model # at the moment. The on/off switch on the control panel is a sensor, and we pushed it in too hard and it broke through (made a hole). Now the airco doesn't go on. We bought a universal remote for Kenmore, but it doesn't work. OUr old (original) remote didn't work either. Should we try to get hold of a "new (replacement)" original remote and see if that helps? What do

Buying a new remote would not help at all, because i dont think that the problem is it with the remote it may be with the window air conditioner, if you know about it you may have to open it, else you should consult a repair guy. ... Kenmore Air Conditioners

Hi Guys, I work on a mine site and the temperature on my Mitsubishi model MSZ - 25GEVA split air con has been set and I cannot change it via the remote control. In any mode i.e. cool/ heat if you push the temperature buttons nothing happens. The remote works fine ON/ Off/ Fan etc but they've locked the temperature so it can't be changed. Even if I push the reset button the temperature still remains pre set. I'm of the thought that I might need to remove the batteries and hold done specific bu

... Mitsubishi MSZ09UN Air Conditioner

Hi We have the above panasonic air conditioner that has stopped working. I changed the batteries in the remote control and since then it hasn't worked but I can't seem to set the clock and timer on the remote?!?!? Lyn

Check batteries are fit in right position. Even with same type remote it's not working if you try, the problem is with your indoor PCB. ... Air Conditioners

About two years ago, I purchased a: Hunter 56 In. Brushed Nickel Ergonomic™ Remote Control Ceiling Fan Model 21871 A few months ago, a bolt of lightning struck through my house and my fan stopped working ever since then. The remote works fine since I can see the senson light up. And I know the electrical wiring is fine too because it was tested. However, I don't believe my fan is under warranty and I sm trying to find someone who could look at it and let me know if it's worth the mone

To have a contractor in your area look at this unit, try using the contractor search on the home page of fixYa, or simply use the yellow pages for your area.My guess is that the lighting burnt or damaged the motor windings in the fan. I a ... Hunter Air Conditioners

Indoor Sanyo ductless split Model # KHS 2432 serial # 0012832, Works fan on and off functions and speeds. As soon as you set the remote to heating or cooling the unit beeps 5 times quickly and then the unit no longer responds to remote control. The blower will then run for 1 minute and then the the unit no longer will work. Power must be reset for blower operations to function again. Out door unit, has enough charge, Ambient temp 39 M#CH2432 S#0012424

... Sanyo Air Conditioners

Hi, I have a NEC Model RSH2423 split system still in great condition. It stoped working by Remote Control and only workson the forced operation under the cover. I have checked the remote and replaced the batteries and know it works. Is this a problem that can be fixed

... Air Conditioners

I have a Bon*Air / Bon*Aire / Bondair / Bondaire / Bon Air / Bon Aire model BON 13-12hp that won't respond to the remote. Remote works but won't control unit. HELP, I am only here for anothe

... Air Conditioners

Windward II, model 55296; Remote no longer activates fan or light even though electricity is on. Batteries have been changed. Face of remote just has blank rectangle with a blank.curved indicator underneath it, Remote and fan have worked flawlessly for a year since they were purchased. Is the problem with the remote? Email = [email protected]

First off you might try shutting down the power on the Windward itself. There may be a disconnect near the unit, or a breaker.. or the breaker may be in the house in the main breaker panel. In either case, turn it off for maybe 10 minutes and see if ... Air Conditioners

I have a sanyo aircon - model SAP-K95GHS5 and lost the remote. I bought a universal remote kt-518 wich are suppose to work under sanyo from 046 till 095. It switches on and off but nothing else. Where can i buy an original remote or what code must i use under universal remote kt-518?

... Sanyo Air Conditioners

I have a sanyo aircon - model SAP-K95GHS5 and lost the remote. I bought a universal remote kt-518 wich are suppose to work under sanyo from 046 till 095. It switches on and off but nothing else. Where can i buy an original remote or what code must i use under universal remote kt-518?

... Sanyo Split System Air Conditioner

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || www.ad-trader.net || Terms of Use || Contact || Privacy Policy
Load time: 0.1192 seconds